DE - Directional Spool Valve Sub-plate Mounted
18Pages

Industrial Products Size 6 up to 315 bar up to 63 L/min Directional Valves Directional Spool Valve Sub-plate Mounted Type DE6, Series 20 Features ◊ Direct operated directional spool valve with solenoid operation. ◊ High durability. ◊ Various options. ◊ Oil immersed type valve with no oil leakage from solenoid pin. ◊ Porting pattern to DIN 24 340 form A ISO 4401 and CETOP-RP 121H. ◊ Wet pin AC & DC solenoids with removable coil. ◊ Individual electrical connection and central connections. ◊ Manual override (standard). ◊ Solenoid coil can be rotated through 90º. ◊ Coils can be replaced without releasing any fluid. Model DE6 Page 1.18 Data Sheet D-1001/06.99 Data Sheet D-1001/06.99 GB

Directional Valves Industrial Products 4 2 1 T A P B 3 5 6 Valve DE6 Functional Description Type DE6 Directional Spool Valves are solenoid operated directional spool valves that are used to control (start, stop and direction) fluid flow. A manual override (6), (standard), is provided for emergency operation of the control spool (3) without energising the solenoid. The valves basically comprise a housing (1), one or two solenoids (2), a control spool (3), and two springs (4). Type DE 6..20 - 0** (only with spool type 001, 003 and 004) - directional valve with 2 switching positions and 2...

Industrial Products Directional Valves Ordering Code – Directional Spool Valve, Direct Operated DE 6 P 20 1 04 W D 24 AL PO8 Directional Valve, Solenoid Operated Suitable Oil No Code: Mineral Oil, Fatty Acid Ester, Water Glycol V: Phosphate Ester Size 6 Type of Mounting P: Plug-in Throttle in P Port Sub-plate Mounting No code P08: P10: P12: P15: P20: P25: P30: P40: Series Number 20 Spool Return 0: 1: 2 2-position without Spring Return 2-position without Spring Return with detent 2-position with Spring Return OR 3-position with Spring Return No plug-in throttle ∅0.8 mm ∅1.0 mm ∅1.2 mm ∅0.8...

Directional Valves Industrial Products Spool types Spool type Hydraulic Symbol Transient condition Spool type Hydraulic Symbol Transient condition Spool type Hydraulic Symbol Transient condition Attention! -Take the pressure intensification into account when using differential cylinders! Data Sheet Hydraulic Products

Industrial Products Directional Valves

Directional Valves Industrial Products

Industrial Products Directional Valves Technical Data For applications outside the following parameters, please consult Kawasaki Precision Machinery (UK) Ltd. General Installed Position Optional Ambient Temperature Up to 50°C Weight Valve Type AC Solenoid DC Solenoid Single solenoid valve 1.45 kg 1.6 kg Valve with 2 solenoids 1.9 kg 2.2 kg Hydraulic Data Pressure Fluid Mineral oil, phosphate ester, fatty acid ester and water glycol. Phosphate ester is only suitable for use with FPM seals. Pressure Fluid Temperature Range -20°C to +70°C Degree of Contamination Maximum permissible degree of...

Directional Valves Industrial Products Technical Data (continued) Electrical Type of Voltage DC AC Available Voltages 12, 24 120, 240 (50/60Hz) Voltage Tolerance (nominal voltage) ±10% ±10% (50Hz) ±20% (60Hz) Power Consumption 30 W - Holding current - 50 VA Startup current - 240 VA Duty Cycle 100% 100% Switching Time ON: OFF: 45 mS 20 mS ON: OFF: 15 mS 25 mS Switching Frequency Up to 18,000 cycles/hour Up to 18,000 cycles/hour Insulation to DIN 40 050 IP65 IP65 Coil Temperature Up to 180°C Up to 180°C Note: With electrical connections the earth (PE) must be correctly connected. Model DE6...

Industrial Products Directional Valves Switching Data for DC solenoid and AC/DC solenoid Valves Note: The maximum flow VS voltage in the ^-nominal voltage Three Position valves Maximum flow (L/min) Data Sheet Hydraulic Products

Directional Valves Industrial Products Valve wiring details AC Double Solenoid Common Earth *1 lamp Common plate *2 Lamp SOL. b Lamp Earth *1 Terminal a Terminal b Single Solenoid (SOL. a) SOL common earth Central Terminal SOL. a Central Terminal terminal a or b DC terminal a or b suppressor lamp SOL common earth AC/DC Earth Common terminal a or b Lamp suppressor lamp recti -fier SOL common earth SOL. a AC terminal 1 Terminal a Plug-in Connector to DIN SOL terminal 2 earth Earth 1 1 3 2 3 2 Terminal 2 Note: *1. Either earth terminal can be used. *2. When common plate is unnecessary (4 wires...

Industrial Products Directional Valves Characteristic Curves Data Sheet Hydraulic Products

Directional Valves Industrial Products Unit Dimensions – Plug-in connector- AC solenoid (dimensions in mm) 31 32.5 0.75 40.5 Plug-in connector to Din 43650 191.4 27 PG11 70 95 74.2 39 3 position spring return 2 position without spring 7 Large plug-in connector 11 4-M5 65 142.7 (2 position spring return) O-ring (port A, B, P, T) 25 53 90 48 27.5 Ø6 22 Model DE6 Page 14.18 Data Sheet D-1001/06.99

Industrial Products Directional Valves Unit Dimensions – Central Terminal- AC solenoid (dimensions in mm) 40.5 0.75 74.2 Lamp (Sol a) 32.5 T 31 B A P Lamp (Sol b) 191.4 90 50.7 48 Cable Gland G1/2 47 90.3 23.5 SOL b 25 SOL a Ø6 7 3 position spring return 2 position without spring 11 22 4-M5 142.7 (2 position spring return) 65 O-ring (port A, B, P, T) Model DE6 Page 15.18 Data Sheet D-1001/06.99

Directional Valves Industrial Products Unit Dimensions – Central terminal, DC, AC/DC Solenoid (dimensions in mm) 40.5 0.75 83.5 Lamp (Sol a) T 32.5 31 B A P Lamp (Sol b) 210 90 60 48 Cable Gland G1/2 25 72 90.3 23.5 Ø6 7 3 position spring return 2 position without spring 11 65 22 4-M5 152 (2 position spring return) O-ring (port A, B, P, T) Model DE6 Page 16.18 Data Sheet D-1001/06.99

Industrial Products Directional Valves Unit Dimensions – Plug-in connector, DC, AC/DC Solenoid (dimensions in mm) 31 32.5 0.75 40.5 Plug-in connector to Din 43650 PG11 210 83.5 F 70 G 27 3 position spring return 2 position without spring 7 Large plug-in connector 11 4-M5 65 48 E 152 (2 position spring return) 25 D C O-ring (port A, B, P, T) C DC Solenoids AC/DC Solenoids 101 104 D E 64 27.5 57.2 34 KAWASAKI PRECISION MACHINERY (UK) LTD Ernesettle, Plymouth, Devon, PL5 2SA, England Tel: +44 1752 364394 Fax: +44 1752 364816 E Mail:info@ kpm-uk.co.uk F G 39 53 106 109 The specified data is for...