You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | | | |
| | | |
| | | |
| | | Bearing Life (continued) | | |
| | | |
| | | Bearing Life Correction Factors for Partial Displacement | | |
| | | |
| | | 1200% 1000% 800% 600% 400% 260% 200% | | |
| | | |
| | | 0% | | |
| | | |
| | | 70% 75% 80% Displacement % | | |
| | | 50% | | 60% | | | 85% | | 90% | | |
| | | | |
| | | |
| | | All bearing life curves on the previous pages refer to L10 life at full displacement. The foregoing curve is therefore to be used where duty cycle considerations require one to compute weighted life, which include partial displacement conditions. For example as shown above if the bearing life at full displacement from the previous graphs was say 50,000 hours, then at the same operating condition with only 75% displacement the bearing life would be 260% of 50,000 hours or 130,000 hours. | | |
| | | |
| | | | | | | | | | | | | Hydraulic Products | | | | Model K3VL | Page 19. | Data Sheet P-1002/02.09 | | | | | | | | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | |