Kroil - KANO - #3

/ 5


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
Pages:


See other catalogues for KANO
You may also be interested in

Grease, Leakage sensor, Release agent, Penetrating oil, Oil


Text version of the page
KROIL
8/12/08
SECTION 7: HANDLING AND STORAGE
Handling: Avoid breathing vapors, aerosols and mists. Use with adequate ventilation. Avoid contact with the eyes, skin and clothing. Wash exposed skin thoroughly with soap and water after use. Keep product away from heat, sparks, flames and all other sources of ignition. No smoking in storage or use areas. Keep containers closed when not in use. Do not cut, braze, solder, grind or weld empty containers. Do not reuse containers. Follow all MSDS precautions in handling empty containers.
Storage: Store in a cool, dry, well-ventilated location away from incompatible materials. Keep containers closed.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Chemical Name
Exposure Limits
Severely Hydrotreated Petroleum Distillates
5 mg/m3 OSHA PEL-TWA 5 mg/m3 ACGIH TLV-TWA 10 mg/m3 ACGIH TLV-STEL
Light Petroleum Distillates
100 ppm OSHA PEL-TWA 100 ppm ACGIH TLV-TWA
Aliphatic Alcohol
150 ppm OSHA PEL-TWA 100 ppm ACGIH TLV-TWA
Aliphatic Alcohol
50 ppm OSHA PEL-TWA 50 ppm ACGIH TLV-TWA
Glycol Ether
50 ppm OSHA PEL-TWA 20 ppm ACGIH TLV-TWA
Proprietary Ingredients
None Established
Ventilation: Use with adequate general or local exhaust ventilation to maintain concentrations below the occupational exposure limits. Use explosion proof electrical equipment and wiring where required.
Respiratory Protection: If needed, a NIOSH approved respirator with organic vapor cartridges may be used. For higher exposures, a supplied air respirator may be required. Respirator selection and use should be based on contaminant type, form and concentration. Follow OSHA 1910.134, ANSI Z88.2 and good Industrial Hygiene practice.
Skin Protection Impervious gloves are recommended when needed to avoid skin contact. Based on available test data, 4H or Silver Shield gloves are suggested.
Eye Protection: Chemical safety goggles recommended.
Other Protective Equipment: Impervious clothing as required to prevent skin contact and contamination of personal clothing. Suitable eye wash and washing facilities should be available in the work area.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance and Odor: Slightly reddish liquid with a refreshing odor.
pH: 6-7 Specific Gravity: 0.87
Boiling Point: 258°F Melting Point: Not applicable
Vapor Pressure: 12 mm Hg @ 20°C (aliphatic alcohol) Water Solubility: Negligible
Vapor Density (air =1): Greater than 1 Evaporation Rate (ether=1): Less than 1
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable under normal conditions of storage or use.
Incompatibility/Conditions to Avoid: Avoid strong oxidizing agents, reducing agents, acids, bases, amines, alkanolamines, ammonia, chlorinated compounds. Avoid heat, sparks, flames and all other sources of ignition.
Page 3 of 5

pageCatalog pdf di En 2012-02-06-11