| | | |
| | | |
| | | |
| | | |
| | SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
| | | |
| | | | | | | | | | | | | | | | Severely Hydrotreated Petroleum Distillates | | | | | | Light Petroleum Distillates | 64742-95-6/64742-887/64742-47-8 | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | SECTION 4: FIRST AID MEASURES | |
| | | |
| | Eye: Rinse thoroughly with water for at least 15 minutes, holding the eye lids open to be sure the material is washed out. Get immediate medical attention. Skin: Remove contaminated clothing. Wash contact area thoroughly with soap and water. Get medical attention if irritation or symptoms of exposure develop. Launder clothing before re-use. Inhalation: Remove victim to fresh air. Give artificial respiration if needed. If breathing is difficult, oxygen should be administered by qualified personnel. Get immediate medical attention. Ingestion: DO NOT induce vomiting. Keep the victim calm and warm. Never give anything by mouth to an unconscious or drowsy person. Get immediate medical attention. | |
| | | |
| | SECTION 5: FIRE FIGHTING MEASURES | |
| | | |
| | Flash Point: 124°F (51oC) COC Flammable Limits: LEL: 0.9% UEL: 10.6% Autoignition Temperature: Not Determined Extinguishing Media: Use carbon dioxide, dry chemical or foam. Water may be ineffective but can be used to cool containers and structures. Special Fire Fighting Procedures: Wear NIOSH approved, positive pressure, self-contained breathing apparatus and full protective clothing. Cool fire exposed containers with water. Unusual Fire Hazards: Vapors are heavier than air and may travel along surfaces to remote ignition sources and flash back. Never use welding or cutting torch on or near containers (even empty) because product can ignite explosively. Combustion products may be hazardous. Hazardous Decomposition Products: Oxides of carbon, organic compounds, smoke and fumes. | |
| | | |
| | SECTION 6: ACCIDENTAL RELEASE MEASURES | |
| | | |
| | Spill: Remove all ignition sources such as open flames, spark producing equipment, pilot lights, etc. Wear appropriate protective clothing to prevent eye and skin contact including impervious gloves, safety goggles and respirator if needed (refer to Section 8 for specific recommendations). Ventilate area. Cover with an inert absorbent material and collect into an appropriate container for disposal. Report spills and releases as required to appropriate authorities. | |
| | | |
| | | |
| | | |
| | | |