Kalmar TT616i
12Pages

{{requestButtons}}

Catalog excerpts

Kalmar TT616i - 1

Kalmar TT616i LoLo Tractor INTELLIGENT POWER FOR CONTAINER TERMINALS

Open the catalog to page 1
Kalmar TT616i - 3

Kalmar Terminal Tractors provide uncompromising quality - always Lift-on/lift-off (LO/LO) operations comprise about 90% of shipping trade around the world, of which almost all today is containerised cargo. The performance expectations for your container terminal’s LoLo operations are hence high – efficiency and financial results go closely hand-in-hand. TT616i can be adapted to manufacturing logistics and similar operational environments. The TT616i presents terminal operators with a great flexibility by deploying the most economical methods and meeting increasingly stringent environmental...

Open the catalog to page 3
Kalmar TT616i - 4

Tropical conditions Tropical cooling, tropical roof, air conditioning (optional) Side panel, power steering, easy access, air suspended cabin, air suspended seat, tall cabin Access from and to cabin, safety Wide steps, rear door, large even platform, good sturdy handles Large windows, half-cab design, no A-pillars Electric cabin tilt, components visible, easy access to service points Engine protection Shutdown/alarm systems Less damages Sturdy all-around bumpers Wide steering angle, short wheelbase The strongest performer in the market Today’s fast-paced container terminal operations need...

Open the catalog to page 4
Kalmar TT616i - 5

Purpose-built power line for stop-and-go operation Smooth ride with empty trailer Rear axle air suspension (optional) Ability to take container shock loads Purpose-built, strong RoRo type chassis Gross combination weight Pulling capacity at 95 tonnes Lifting capacity Hydraulic elevating fifth wheel (optional) Fuel economy High torque-to-RPM ratio, EcoDrive, optimized axle ratios TESTED AND PURPOSE-BUILT Complete integration of the engine, transmission and the whole machine with this interface simplifies use and improves efficiency. Intelligent features, such as information generation and...

Open the catalog to page 5
Kalmar TT616i - 6

The CAN-Bus interface for intelligent performance FAULT DIAGNOSTICS The CAN-Bus interface parameters are quick and easy to set, and the system also offers you an easy tractor customisation. It is as unique to your needs and requirements as possible. The CAN-Bus interface helps with maintenance planning by having all information and diagnostics readily available on the driver’s display, allowing troubleshooting to take place in just a fraction of the usual time. Because fewer wire harnesses are employed the tractor is less prone to malfunction and maintenance is much easier. ECODRIVE The...

Open the catalog to page 6
Kalmar TT616i - 7

AUTOMATIC PICK AND DROP The automatic ‘pick and drop’ feature makes the driver’s job much easier. With this feature the driver can operate much faster shortening the operational cycle significantly, and yet following all the safety aspects. THE BENEFITS OF PICK AND DROP • Automatic lifting and lowering of the lift boom to pre- adjusted heights. Driver just needs to touch the joystick to raise or lower the trailer/lift boom to a certain height. • Protects trailer legs SILENT DRIVE MODE TT616i features an optional silent drive mode with rpm limit and reversing alarm bypass. Rpm limit and...

Open the catalog to page 7
Kalmar TT616i - 8

Heavy duty frame and chassis designed for port operations TT616i features an unusually robust chassis and heavy duty frame which is based on TR618i, used in RoRo port operations. Its design is optimized by means of FEM analysis. Additionally it has an optional rear axle air suspension. Its bolted chassis components facilitate easy repair. Purpose-built, strong RoRo type chassis is strongest in The market.

Open the catalog to page 8
Kalmar TT616i - 9

Safety and ergonomics support the best performance The advanced design provides maximum efficiency, enhanced driver comfort and greater operational safety, whilst innovative technology helps operators plan for maintenance downtime. The innovative design provides excellent all-around visibility and incorporates opening side windows, whilst high-quality materials create a quiet and productive driving environment. Access into and out of the cab – and onto the rear platform – is easy and safe. The automatic transmission aids drivability with extremely smooth, barely noticeable gear changes. A...

Open the catalog to page 9
Kalmar TT616i - 10

Great value for money with easy maintenance The TT616i is designed to be easy to maintain on a daily basis. Access for daily checks and adjustment procedures, including access to many servicing points, has been simplified thanks to the integrated kerbside bonnet. For more extensive maintenance work, the electric overhydraulic pump system allows the cabin to be tilted to 45 degrees. With the CAN-Bus providing up-to-date information on any occurring maintenance needs, you are able to plan operations better. High operational reliability combined with easy maintenance mean that this model is...

Open the catalog to page 10
Kalmar TT616i - 11

Sensitivity to environment is part of our philosophy The tractor also incorporates EcoDrive function as a standard and Silent Drive function as an option, which have allowed us to keep noise and emissions to an all time low, minimizing any impact on the environment. Environmental values have played a key role in the design of ther Kalmar TT616i LoLo Tractor. Keeping in mind that some terminals are located close to residental areas where it is essential to avoid hazardous noise, particularly at night, the EcoDrive and Silent Drive functions have allowed us to minimize external noises and...

Open the catalog to page 11
Kalmar TT616i - 12

Cargotec improves the efficiency of cargo flows by offering solutions for the loading and unloading of goods on land and at sea – wherever cargo is on the move. Cargotec’s main daughter brands for cargo handling are Hiab, Kalmar and MacGregor. In addition, Cargotec’s global network offers extensive services that ensure the continuous and reliable performance of equipment. www.cargotec.com Cargotec Finland Oy Valmetinkatu 5, P.O. Box 387 FI-33101 Tampere Finland tel. +358 3 265 8111 fax +358 3 265 8201 www.cargotec.com www.kalmarind.com Global presence and local service bring our solutions...

Open the catalog to page 12

All Kalmar catalogs and technical brochures

  1. T2

    5 Pages

  2. Gloria

    9 Pages

  3. DRF400-450

    20 Pages

  4. DCT80-90

    5 Pages

  5. ECH_DCF70-100

    12 Pages

  6. ECF50-90

    7 Pages

  7. DCF50-90

    7 Pages

  8. DCF180-520

    9 Pages

  9. EGO Cabin

    9 Pages

  10. DCG90-180

    9 Pages

  11. kalmar DRT

    5 Pages

  12. Reachstackers

    20 Pages