Standard Gas Springs & Mounts - KALLER - (Version JPG) - Page n° 51 - PDF Catalogue | Technical Documentation

See other catalogues for KALLER

Gas spring, Cam, Punching unit, Spring

Text version of the page

2.4/4

X 500

The Power Line series are our shortest and most powerful Piston Rod Sealed gas springs, giving you a great deal of force in a very small amount of space.

These gas springs are available with forces from 170 daN up to 9500 daN and stroke lengths between 7 and 125 mm.

There is a side port for gas charging that can also be used to connect to a hose system.

An upper C-groove, lower U-groove together with two M6 threaded holes allow various mounting possibilities using our standard mounts.

Thread for maintenance M6


Order No.	S Stroke	Force in N at 150 bar/+20°C		L ±0.25	L min	Gas vol. (l)	Weight (kg)
Order No.	S Stroke	Initial	End force*	L ±0.25	L min	Gas vol. (l)	Weight (kg)
X 500-010	10		7200	50	40	0.01	0.25
X 500-013	13		7100	56	43	0.01	0.26
X 500-016	16		7200	62	46	0.02	0.27
X 500-019	19		7400	68	49	0.02	0.28
X 500-025	25		7300	80	55	0.03	0.31
X500-032	32		7200	94	62	0.03	0.34
X 500-038	38	4700	7200	106	68	0.04	0.36
X500-050	50		7200	130	80	0.05	0.40
X 500-063	63		7200	156	93	0.06	0.45
X 500-075	75		7100	180	105	0.07	0.50
X 500-080	80		7100	190	110	0.08	0.52
X500-100	100		7100	230	130	0.10	0.60
X 500-125	125		7100	280	155	0.12	0.70

M6 charge port

M6 (2x), depth 6 mm

* = at full stroke

BASIC INFORMATION

MOUNTING POSSIBILITIES

For general information see "About gas springs", 2.1

Pressure medium...........................Nitrogen

Max. charging pressure..................150 bar (at 20°C)

Min. charging pressure...................25 bar (at 20°C)

Operating temperature...................0 to +80°C

Force increase by temperature.......+0.3%/°C

Recommended max strokes/min .... ~ 50 to 100 (at 20°C) Max piston rod velocity...................1.6 m/s

Rod surface....................................Nitrided

Tube surface...................................Black oxide

Repair kit........................................ 3018846

■}//////)/)a

Body 0 + J5

Body 0+ J5

B FC, FCS

Bottom Top Mount threads

K, FFC

Foot Mount

Drop - In

Note! For dimensions on mounting possibility K refer to chapter 3.

2.4/4

Edition 6 / May 2005

We reserve the right to add, delete or modify components without notification.

by Strömsholmen AB

+46 140 571 00 • www.kaller.com

All dimensions are stated in mm.

All dimensions are nominal unless tolerance is stated.

Standard Gas Springs & Mounts - KALLER - #51

Gas spring, Cam, Punching unit, Spring