Refrigeration dryers SECOTEC series - 5 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

Catalogue excerpts

The SECOTEC® System In developing the SECOTEC dryer range, KAESER’s goal was to produce a system that consumed minimal energy and which would provide optimal reliability and userfriendliness. The resulting SECOTEC system from KAESER KOMPRESSOREN fulfi ls all of these requirements and, in contrast to most refrigeration drying systems, uses a highly effi cient cycling system: SECOTEC Control. Therefore, the dryer’s refrigeration circuit consumes power only when necessary. Why is it necessary to dry Enhanced energy savings compressed air? The atmospheric air drawn into a compressor is a mixture of...

 Open the catalogue to page 2

SECOTEC® – Energy savings all day, every day Energy savings all day, every day, with SECOTEC® Control The high capacity thermal mass is cooled down to cut-out temperature by the refrigeration circuit and extracts the heat from the compressed air that fl ows through the heat exchanger. As soon as the temperature of the thermal mass rises to the cut-in temperature the refrigerant compressor starts and cools it down again. This feature considerably reduces power consumption compared with noncycling controllers. A C E A A B C D E F G H Most efficient Least efficient AA 2006 SECOTEC performance Minimal...

 Open the catalogue to page 3

Correction factors for deviating operating conditions (Flow rates in m3/min x c...) Calculation of dryer fl ow rate under deviating conditions: Selected refrigeration dryer is a TB 19 with 2.1 m3/min (Vreference) Example Max. possible fl ow rate under operating conditions: Working pressure: 10 bar (g) . Table . cp = 1.1 Vmax. operational = VReference x cp x cTi x cTa Air inlet temperature: 40 °C . Table . cTi = 0.83 Vmax. operational = 2.1 min3/min x 1.1 x 0.83 x 0.99 = 1.90 m3/min Ambient temperature: 30 °C . Table . cTa = 0.99 Model p bar(g) 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Model Ti (°C) 30...

 Open the catalogue to page 4

www.kaeser.com Dairies, breweries Choose the required grade of treatment according to your fi eld of application: Food and semi-luxury food production Very clean conveying air, chemical plants Air treatment using a refrigeration dryer (+3°C pressure dew point) For air mains subject to sub-zero temperatures: Compressed air treatment with a desiccant dryer (down to -70 °C pressure dew point) Pharmaceutical industry Weaving machines, photo labs Paint spraying, powder coating Packaging, control and instrument air General works air, high-grade sand blasting Shot blasting Low-grade shot blasting Conveying...

 Open the catalogue to page 5

All KAESER catalogues and technical brochures

  1. HPC plc

    7 Pages

    En
  2. breaker

    1 Pages

    En
  3. Genuine

    3 Pages

    En
  4. MOBILAIR 50

    3 Pages

    En
  5. Air receivers

    7 Pages

    En
  6. PREMIUM series

    8 Pages

    En
  7. Current issue

    17 Pages

    En
  8. Omega

    7 Pages

    En
  9. BB – HB series

    13 Pages

    En
  10. Compact series

    5 Pages

    En
  11. Air receivers

    3 Pages

    En
  12. Dental series

    5 Pages

    En
  13. Boosters series

    5 Pages

    En
  14. EUROCOMP series

    5 Pages

    En
  15. PREMIUM series

    8 Pages

    En
  16. CLASSIC series

    6 Pages

    En

Archived catalogues