BB – HB series - 13 Pages

Add to MyDirectIndustry favorites
BB – HB series

Catalog excerpts

www.kaeser.com Rotary Blowers BB – HB Series with the world-renowned OMEGA PROFILE Flow capacities 0.59 to 160 m³/min – Pressure up to 1000 mbar, vacuum to 500 mbar

 Open the catalog to page 1

KAESER – KAESER was established in 1919 as a machine workshop, but started on the road to becoming one of the world’s leading compressed air system providers in 1948 when the first reciprocating compressor left the Coburg production line. The final breakthrough came in the 1970s with development of KAESER's rotary screw airend featuring SIGMA PROFILE rotors. In 1991, KAESER acquired the 'Geraer Kompressorenwerke', a company with a proud heritage of over 100 years of compressor and blower construction. Production of KAESER's newly developed OMEGA rotary blowers began at the plant in 1993 and...

 Open the catalog to page 2

OMEGA Profile – Three-lobe KAESER OMEGA blower block For pressures up to 1000 mbar(g), discharge temperatures up to 160 °C, wide control range with frequency-controlled operation, Q 2.5 rotor balancing for quieter operation, extended service life and minimal maintenance requirement. 4 1 4 2 3 OMEGA PROFILE Pulsation Graph Made in Germany Made in Germany to the highest quality standards, KAESER blower blocks and rotors are manufactured using the most advanced production technology to ensure optimum product quality. Advanced blower design Pulsation of two- and three-lobe blocks at 500 mbar(g)...

 Open the catalog to page 3

*** Intelligent solutions Non-wearing seal Well-proven piston ring labyrinth seals with pressure relief channels between the flowand oil-chambers are fitted as standard. Optimised lubrication Oil slinger-discs at each shaft end ensure that all relevant bearings and gears are evenly lubricated. Solid block casing Cast as a single piece, the casing has a distinctive ribbed structure that not only provides added strength and rigidity, but also ensures optimum heat dissipation. Generously sized bearings Heavy-duty cylinder roller bearings completely absorb the continuously changing radial...

 Open the catalog to page 4

Cost-efficient OMEGA CONTROL The OMEGA CONTROL monitors all operational parameters, displays data in plain text and is able to communicate both with master control systems (SIGMA AIR MANAGER) and centralised control systems. Generously sized bearings Heavy-duty cylinder roller bearings completely absorb the continuously changing radial gas-forces that are exerted on the rotors. As a result, they avoid the springing effect of selfaligning bearings and last up to ten times longer with the same loading. Oil level inspection at a glance Large, easy to view sight-glasses enable quick and easy...

 Open the catalog to page 5

Maximum efficiency, minimal space requirement Compact design Intelligent design allows all service and maintenance work to be carried out either from the top or front of each unit. COMPACT series blowers can therefore be installed directly next to one another, because all components are integrated within each unit. All pipe connections and cooling air apertures are located at the rear of the unit, which makes side-by-side installation of several packages even easier. Optimum component accessibility from the front – V-belt tensioning device and tension indicator (two-section belt guard for...

 Open the catalog to page 6

Performance High-efficiency motors Eff1*** drive motors (IP 55 with insulation class F) ensure optimum blower efficiency and generate considerably less heat during operation than other motors. Automatic belt tensioning Irrespective of motor weight, the pivoting motor base with tensioning spring automatically ensures optimum belt tension and, as a result, transmission efficiency. This system consequently also reduces servicing and maintenance costs. Simple oil change An oil drain-line is installed next to the enclosure door to enable quick and easy oil changes without having to carry out...

 Open the catalog to page 7

Special systems for specialised applications Corrosion-resistant blowers (OMEGA B) – Rotors and block casings made from cast chromium-nickel alloy – Special internal block-sealing available – Suited to e.g. compression of water vapour Gas-tight blowers For pneumatic conveying use under nitrogen atmosphere conditions in closed loops for example, where leakages of any kind have to be kept to an absolute minimum. Vacuum blowers with pre-inlet cooling (OMEGA PV) – For use in low vacuum ranges up to 100 mbar(a) or 900 mbar vacuum – Flow capacity up to 120 m³/min – Particularly suited to...

 Open the catalog to page 8

KAESER blowers – Planning and accessories Filtering Application-specific vacuum or pressure filters ensure that the required air quality is achieved. The operating environment... ...is controlled by specially tailored components, such as protective gratings, fans and inlet / outlet silencers, that are designed to work seamlessly with one another. Heat exchanger Easily integrated into heat recovery systems, the heat exchanger enables exceptional process-air cooling even at high ambient temperatures. Manage up to 16 blowers Depending on the model, the SIGMA AIR MANAGER control system is able...

 Open the catalog to page 9

Unrivalled quality through advanced manufacture Measurement and inspection To maintain the very best in product quality, we meticulously inspect and measure every block casing to ensure that it is manufactured to within the specified tolerances. Case machining Just like the rotors, the casing for every KAESER rotary blower block is machined using advanced climate-controlled CNC machining centres to ensure consistently high product quality. Flexible production The very latest production techniques and processes ensure exceptional product quality, minimal lead time and enable...

 Open the catalog to page 10

Model (3-lobe) Max. pressure bar Max. delivery (m³/h) 100 200 300 400 500 600 700 800 1000 2 000 3 000 4 000 5 000 6 000 10 000 HB 1600 PI HB 1300 PI HB 950 C FB 790 C FB 620 C FB 440 C EB 420 C EB 290 C DB 236 C DB 166 C CB 130 C CB 110 C BB 88 C BB 68 C BB 52 C 0.8 1.0 1.0 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.8 1.0 1.0 1.0 7 000 8 000 9000 The right block for every application Blowing-air Rotary blowers as centralised, highly efficient sources of quality blowing- and / or cooling-air. KAESER management systems are able to coordinate operation of several units within an installation. Mobile...

 Open the catalog to page 11

All KAESER catalogs and technical brochures

  1. HPC plc

    7 Pages

  2. breaker

    1 Pages

  3. Genuine

    3 Pages

  4. MOBILAIR 50

    3 Pages

  5. Air receivers

    7 Pages

  6. PREMIUM series

    8 Pages

  7. Current issue

    17 Pages

  8. Omega

    7 Pages

  9. Compact series

    5 Pages

  10. Air receivers

    3 Pages

  11. Dental series

    5 Pages

  12. Boosters series

    5 Pages

  13. EUROCOMP series

    5 Pages

  14. PREMIUM series

    8 Pages

  15. CLASSIC series

    6 Pages

Archived catalogs