Text version of the page

Technical Data - Series 0600

Type

S 0650

0650_RS1

Type

SX 0650

end pieces

Chain cross sections

in accordance with section in schematicillustration
s 31 50 T Stays mounted on every 2nd chain link! Stay variant

“RS 1”

a T a x a T Frame stay - with a detachable profile bar for short to medium travel lengths andlow travel speedsL
B i 17,5 17.5 B St B k smax :6 m
for S 0650 5 m
for SX 0650 Calculation of the chain width: v B = 100 mmB
max :1 m/s
k min B Please call for advice in marginal cases.The stay variant RS 1 can be supplied withmovable dividers.Please state the number of dividers percross section.
k = B
i + 35 mm
k max = 300 mms = 3 mma
Calculation of the stay width: T Tmin = 11.5 mma B
St = B
i + 20 mm
x min = 13 mm Stay variant

“RS 2”

Frame stay -with bolted profile bars
Peripheral divider for short to medium travel lengthsand low travel speedsL
s T 31 50 smax :9 m
for S 0650 6 m
for SX 0650 v
max :1.5 m/s
a T a x a T B i 15,5 0650_RS2 15.5 B St Please call for advice in marginal cases.The stay variant RS 2 can be supplied withmovable dividers.Please state the number of dividers percross section.
B k Calculation of the chain width: B
k min = 100 mmB B
k = B
i + 31 mm
k max = 300 mms = 3 mma
Calculation of the stay width: T Tmin = 11.5 mma B
St = B
i + 16 mm
x min = 13 mm

Intrinsic chain weight

for two band chains depending on the chain width
5.0 5,04,54,0 3,5050100150200300250350400 Kettenbreite Bk in mm in kg/m k 4.5 with frame stays RS 1 / RS 2
4.0 Intrinsic chain weight qkin kg/m Ketten - Eigengewicht q 3.5 Weight of the chain bands: 3.6 kg/m(excluding stays)
Chain width Wereserve the right to make technical changes! P045