Text version of the page

Design Guidelines

Horizontal arrangementturned through 90°- circular (lying on its side) Cable carriers

With this arrangement the cable carrier “turned through 90°” is connectedwith a machine performing circular operations.The “travel length β ” is indicated in angular degrees!

Application:

→ Cable carriers “turned through 90°” – for circular movements whichare wound up on a “rotating body”.
β → This kind of cable carrier is preferred for smaller systems, often with ahigh angular travel length. Through the combination of the bend radius KR and the reverse bendradius RKR, the cable carrier can deliberately move in two precisely defined circular movements.In this way the most diverse circular movements can be realised.The cable carrier system is attached to the inner and outer ring of a guidechannel. The moving ring (inner or outer ring) is the driver.

EBV 08

with reverse bend radius RKR

Note:

Cable carriers “turned through 90°” –for circular movement, with bend radius KR and “reverse bend radiusRKR” in a one-sided or opposing arrangement.For angles of rotation > 180°the cables must not be arranged next to oneanother in the chain cross-section.

EBV 09

As a general rule, cable carriers in this configuration must alwaysbe guided in a channel. The channel floor must be designed so as to guarantee low-wear operation, since the cable carriers slide on the band side over the channel floor and are supported by the channel walls. interchangeable mounted gliding elements. Furthermore, several KABELSCHLEPP cable carrier systems (carriers / conduits) can be fitted with They are made of plastic with very high sliding properties and guaranteeoptimum gliding operation and long installation life.
2.18 We reserve the right to make technical changes!