| | | | | |
| | Type | 709050 (JUMO IPC) | TYA-110/3, 25...100...150...250 | |
| | Dimensions (L x W x H) | 272mmx260mmx175mm (70A) 344 mm x 300mm x204.5 mm (100/200A) | 195mmx110mmx152mm (25/50A) 195mmx125mmx170mm (75/100A) 220 mmx150mmx280 mm (150 /250 A) | |
| | Load voltage | 20, 60, 90, 120, 150, 210, 380V DC others on request | 24, 42, 115, 230, 265, 400, 460, 500V AC | |
| | Load current | 70A CccCC DC/100 A DC/200A DC | 25, 50, 75, 100, 150, 250A | |
| | Supply for power section | 115, 230, 400 V AC | same as load voltage | |
| | Supply for control section | 115, 230 V AC | same as load voltage | |
| | Operating mode | amplitude control | burst-firing or phase-angle operation | |
| | Circuit variation | single-phase operation | | |
| | Load type | resistive load | resistive and resistive-inductive load (BS 1,2T) | |
| | Control signal | 0(4) - 20 mA 0(2) - 10V 0(1) - 5V | 0(4) - 20mA, 0(2) - 10V 0(1) - 5 V, 0/10V, 0/5V, 0/20mA 5 kft potentiometer floating contact | |
| | Control accuracy | supply variations from -20% / +15% are stabilized with an accuracy of ±0.5% | |
| | Permissible ambient temperature | 0 to 45°C, max. 60° | 5 to 40 °C to EN 60 721-3-3 | |
| | Enclosure protection | IP00 to EN 60529 | | |
| | Protection Class | Class 1, with isolation of the control circuits for connection to SELV circuits | |
| | Weight | approx. 9kg: 70A, approx. 17kg: 100A/200A | depending on load current: 2.8kg or 9kg | |
| | Ventilation | forced ventilation | natural convection | |
| | Features / extra functions | low-voltage heater elements can be operated directly off the mains supply without requiring a reduction transformer, minimum harmonics in the supply network of the plant, light weight, low control reactive power, subordinate control loop comes as standard, partial-load failure, current limiting, load output, European Patent EP1 126 591 B1 | two single-phase units can be wired up as an economy circuit for burst-firing operation, free-running economy circuit for resistive loads, master-slave economy circuit for resistive or transformer loads, firing pulse inhibit, set basic load, subordinate control loop, supply voltage monitoring, partial-load failure, current limiting, load output | |
| | Accessories | supply filter and storage inductor are required | mounting plate for wall fixing | |
| | Additional information | Data Sheet 70.9050 | Data Sheet 70.9040 | |
| | | | | |