Text version of the page

Inductive Conductivity

JUMOCTI-750 Conductivity transmitter with switched contacts JUMOCTI-920Conductivity transmitter

Combined instrument Remote version Conductivity transmitter CTI-920 for the measurement of specific conductivity in liquid media. inductive conductivity cell made from PVDF or PEEK
® insulated and hermetically sealed sensor with an integrated Pt100 for temperature measurement and correction of the conductivity measurement operating temperature 120°C max. (up to 140°C for short periods, such as for steam sterilization) operating pressure 10bar max. second current output for temperature is standard up to nine measuring ranges are integrated measuring ranges from 0 – 1mS/cm to 0 – 2000mS/cm up to four temperature coefficients can be set a rugged housing, made from glass-fiber reinforced polyamide, protects the electronics and the electrical connections from corrosive environmental conditions (IP67 enclosure protection) the instrument incorporates a 3-wire transmitter for conductivity and a 2-wire transmitter for temperature (output signals 4 – 20 mA) High-quality, tried and tested measuring cell in polyether-ether-ketone (PEEK
® Possible application areas ) up to 140°C and 10bar pressure. Food, beverage and pharmaceutical industries, productmonitoring (phase separation of product/product mix/water) in the beverage industry, breweries and dairies, control (e.g. phase separation of detergent/flushing water) of cleaning processes, such as in bottle cleaning plant and cleaning of containers, regulation of the concentration of acids and caustic solutions e.g. in electroplating and processing chemi- stry, use in CIP installations, water and wastewater enginee- ring, e.g. car washing and service water monitoring, dosing of chemicals, leak indication in separated circulation systems, e.g. for heating and cooling. technical description as for JUMO CTI-500 Possible application areas for CTI-500 and CTI-750 General water engineering, HVAC systems, cooling watermonitoring (dilution control), flushing baths, inlet and final checks in factory purification plant, drinking water checks, bottle cleaning plant, CIP-cleaning (dairies). Applications in areas such as the beverage and food industries, and in CIP systems including sterilization by superheated steam. Further information: Data Sheet 20.2752 Further information: Data Sheet 20.2756