Text version of the page

J

0YCE

L

INEAR

A

CTUATORS

1500 POUND AC & DC MODELS Specifications ? Double Clevis Mounting? Standard Travels of 3", 6", 12", 18" & 24"? Double Lead Machine Screw ? Cast Aluminum Housing ? Stainless Steel Lifting Tube ? Spring Type Brake ? Temperature Range of -20° to + 104°F ambient ? Limit Switch Available ? AC Models are 115 Volt ? DC Models are 12 Volt ? Load Limiting Slip Clutch Available (DC Only) ? Limit Switch w/10 Turn Potentiometer (AC Only) ? Lifting Tube Restraining Torque 190 in-lbs. Options ? Trunnion Mount ? AC Extend/Retract Actuator Controller ? DC Extend/Retract Actuator Controller ? Threaded Screw End115 VAC motor is an enclosed, permanent split capacitor induction type. Speeds remain approximately constant regardless of the load. The motor is equipped with a thermal overload device that opens and resets automatically. The standard motor comes complete with heavy-duty capacitor. (90µF) 12 VDC motor is totally enclosed, weather resistant, permanent magnet type. Magnets act as a secondary brake for added safety. This type of motor is smaller, cooler running, more efficient and has higher duty cycles than series-wound motors. Lower current draw provides for longer battery life. The Motor is also equipped with a thermal overload device that opens and resets automatically. The rotation is reversible by reversing the two color-coded leads, and torque is the same in either direction.
Note: Some actuator surfaces may reach 230° F during operation at or near maximum duty cycle. All ratings are nominal and based on the actuator being broken-in for approximately 2500 inches of travel. Approximate weight LA155L = 25 # + 0.5 # /inch of riseApproximate weight LA152C = 19 # + 0.5 # /inch of rise For complete ordering information see page 169
1-800-523-5204 Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators. www.joycedayton.com 153