Magitator type JM - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

JONGIA SPECIALS FOR THE FOOD & DAIRY INDUSTRY Jongia’s direct driven side-entry mixer (type JDRW) is suitable for mounting in the vessel wall or bottom. The mixer is equipped with a single mechanical seal. Depending on the medium, however, it can be fitted with a double mechanical seal with a sealing liquid system. It can be installed close to the bottom for mixing at low liquid level. A large pumping capacity combined with low shear makes the JDRW mixers ideal for larger storage tanks. Tested extensively for cleanability, resulting in a design with ultimate hygienic properties, Jongia’s cupmixer can be mounted without bottom bearing. Radial propulsion ensures good heat transfer while blending or dissolving without excessive foaming. The element is best Postal address P.O. Box 284 8901 BB Leeuwarden The Netherlands suited for low or medium viscosity fluids. Visiting address The Netherlands James Wattstraat 8 construction facilitating CIP and SIP procedures. Cleaning the agitator is less time consuming and more thorough. The construction allows the mixing blades to be mounted/welded on site without compromising the shaft alignment. Minimum shadowing is achieved through the sanitary blade Visiting address Germany LB & LBD type mixers No bottom bearing is required for longer shafts when an extra bearing section is incorporated in the mixer housing . Forces on gearbox are thus absorbed. In addition a secondary mixer housing can be fitted (LBD type) to separate the bearing section from the shaft seal for visual inspection and easy access.

 Open the catalogue to page 1

Jongia’s Magitator type JM suitable for side and bottom mounting A unique design in durability and hygiene. Practically maintenance free. Used in liquid applications and compliant with the most stringent CIP and SIP requirements according to EHEDG, FDA/EC1935:2004. For use in hermetically closed vessels or systems, no need for a complicated rotary seal. EHEDG certification pending. Open construction in the coupling creates sufficient flow, ensures easy access of the liquid and generates an optimal flow between the faces Oversized shaft diameter and bearings to prevent deflection at all times Open...

 Open the catalogue to page 2

All Jongia NV catalogues and technical brochures

  1. JRWM brochure

    2 Pages

    En
  2. Flow patterns

    1 Pages

    En
  3. impellers

    1 Pages

    En
  4. Cup Mixer

    2 Pages

    En