| | | ► E NESKA 2-1 - The refined powerhouse Two power settings for every work situation: Pure Power at 45 W in "Unclamp" mode for extremely abrasive work, for example, using sintered diamond files. And then there is fine work capacity with 25 W in "Vice" mode for working on narrow webs or on edges. Here, it works particularly well with ceramic-fibre files. At both power settings, you can make fine adjustments continuously using the power knob. The large display constantly lets you know the current power setting. This enables you to find the best setting for every work situation. During operation, the system constantly monitors its power consumption: When you put less pressure on the tool, the system reduces power; but when you increase pressure, it automatically increases power. At 140 g, this handpiece is very light. You will be able to manipulate its M6 fine thread confidently in every situation. Specially designed tool holders enable the tools to be used to best effect. And: The ENESKA 2-1 will recognize any tool that you fit into the handpiece and will automatically adjust its power setting. The only thing you need to do is actually work with it. Combine the ENESKA 2-1 with an ENESKA 3-1 or 4-1, and you will have an unbeatable team of fully trained specialists ready to set to work in their respective fields. | | |