Welding and coating systems - joke Technology GmbH - #31

Text version of the page

450 5 Tel. +49 (0) 22 04 / 8 39-0 • Fax +49 (0) 22 04 / 8 39-61 • info@joke.de 5. Welding and coating systems // 5.2. Welding fillers Welding filler JOKE® Fill 250 - Laser Design Dimensions Weight Order No. Price Spools 50 g Ø 0.3 mm 50 g 0 084 453 Ø 0.4 mm 50 g 0 084 454 Ø 0.6 mm 50 g 0 084 456 Spools 150 g Ø 0.3 mm 150 g 0 084 453-2 Ø 0.4 mm 150 g 0 084 454-2 Ø 0.6 mm 150 g 0 084 456-2 Spools 500 g Ø 0.3 mm 500 g 0 084 453-4 Ø 0.4 mm 500 g 0 084 454-4 Ø 0.6 mm 500 g 0 084 456-4 Rods 300 mm Ø 0.3 mm 150 g 0 084 453-7 Ø 0.4 mm 150 g 0 084 454-7 Ø 0.6 mm 150 g 0 084 456-7 Al filler with very high suitability for quick repairs on aluminium section steels. Fine-flowing. Perfect, non-porous surface fusing even for difficult applications. Suitable for material Nos.: Aluminium materials up to F30 Welding filler JOKE® Fill 240 - Laser Design Dimensions Weight Order No. Price Spools 50 g Ø 0.3 mm 50 g 0 084 433 Ø 0.4 mm 50 g 0 084 434 Ø 0.5 mm 50 g 0 084 435 Ø 0.6 mm 50 g 0 084 436 Spools 150 g Ø 0.3 mm 150 g 0 084 433-2 Ø 0.4 mm 150 g 0 084 434-2 Ø 0.5 mm 150 g 0 084 435-2 Ø 0.6 mm 150 g 0 084 436-2 Spools 500 g Ø 0.3 mm 500 g 0 084 433-4 Ø 0.4 mm 500 g 0 084 434-4 Ø 0.5 mm 500 g 0 084 435-4 Ø 0.6 mm 500 g 0 084 436-4 Rods 300 mm Ø 0.3 mm 150 g 0 084 433-7 Ø 0.4 mm 150 g 0 084 434-7 Ø 0.5 mm 150 g 0 084 435-7 Ø 0.6 mm 150 g 0 084 436-7 Al-Mn-Cu-Fe filler. Multi-alloy bronze with very good dry running characteristics on steels with good heat conductivity. Crack-free and non-porous. No hardened joints when applied to steel. Very low shrinkage rate. Also suitable for crack welding on cool channels and plastic moulds. Hardness first layer on steel: approx. 220-280 HB. Hardness first layer on bronze: approx. 200-240 HB. Improved hardness by approx. 30% through intensive cooling! Welding filler JOKE® Fill 242 - Laser Design Dimensions Weight Order No. Price Spools 50 g Ø 0.3 mm 50 g 0 085 013 Ø 0.4 mm 50 g 0 085 014 Ø 0.5 mm 50 g 0 085 015 Spools 150 g Ø 0.3 mm 150 g 0 085 013-2 Ø 0.4 mm 150 g 0 085 014-2 Ø 0.5 mm 150 g 0 085 015-2 Spools 500 g Ø 0.3 mm 500 g 0 085 013-4 Ø 0.4 mm 500 g 0 085 014-4 Ø 0.5 mm 500 g 0 085 015-4 Rods 300 mm Ø 0.3 mm 150 g 0 085 013-7 Ø 0.4 mm 150 g 0 085 014-7 Ø 0.5 mm 150 g 0 085 015-7 Cu-Ni-Si filler with good conductive characteristics. Loy-specific colour characteristics. Intensive cooling from -20° C results in improved hardness by up to 30%. Suitable for joining copper/bronze with steel. Hardness first layer: approx. 60 - 84 HB. Expansion approx. 23 - 32 %, Tensile strength approx. 200 - 280 N/mm2. Suitable for material Nos.: Ampcoloy • Moldmax and other copper materials Laser welding fillers JOKE® Fill Spools 50 g, 150 g, 500 g • Rods 300 mm