Welding and coating systems - joke Technology GmbH - #28

Text version of the page

447 5 5. Welding and coating systems // 5.2. Welding fillers Welding filler JOKE® Fill 185 - Laser Design Dimensions Weight Order No. Price Spools 50 g Ø 0.3 mm 50 g 0 084 273 Ø 0.4 mm 50 g 0 084 274 Ø 0.6 mm 50 g 0 084 276 Spools 150 g Ø 0.3 mm 150 g 0 084 273-2 Ø 0.4 mm 150 g 0 084 274-2 Ø 0.6 mm 150 g 0 084 276-2 Spools 500 g Ø 0.3 mm 500 g 0 084 273-4 Ø 0.4 mm 500 g 0 084 274-4 Ø 0.6 mm 500 g 0 084 276-4 Rods 300 mm Ø 0.3 mm 150 g 0 084 273-7 Ø 0.4 mm 150 g 0 084 274-7 Ø 0.6 mm 150 g 0 084 276-7 Ni-Co-Mo filler especially for aluminium and zinc die casting. This martensitic weld metal is crack-proof and tough. Through artificial ageing, hardness of ca. 50-54 HRC can be achieved. Not chrome-platable. Hardness first layer: approx. 40-46 HRC, depending on composition. Suitable for material Nos.: 1.2343 • 1.2344 and similar Welding filler JOKE® Fill 180 - Laser Design Dimensions Weight Order No. Price Spools 50 g Ø 0.25 mm 50 g 0 084 252 Ø 0.3 mm 50 g 0 084 253 Ø 0.4 mm 50 g 0 084 254 Ø 0.5 mm 50 g 0 084 255 Ø 0.6 mm 50 g 0 084 256 Spools 150 g Ø 0.25 mm 150 g 0 084 252-2 Ø 0.3 mm 150 g 0 084 253-2 Ø 0.4 mm 150 g 0 084 254-2 Ø 0.5 mm 150 g 0 084 255-2 Ø 0.6 mm 150 g 0 084 256-2 Spools 500 g Ø 0.25 mm 500 g 0 084 252-4 Ø 0.3 mm 500 g 0 084 253-4 Ø 0.4 mm 500 g 0 084 254-4 Ø 0.5 mm 500 g 0 084 255-4 Ø 0.6 mm 500 g 0 084 256-4 Rods 300 mm Ø 0.3 mm 150 g 0 084 253-7 Ø 0.4 mm 150 g 0 084 254-7 Ø 0.5 mm 150 g 0 084 255-7 Ø 0.6 mm 150 g 0 084 256-7 Cr-Mo-Mn-V filler with hardenable characteristics. Very tough with good edge retention. Particularly suitable for quick repairs. Nitrable, erodible and chrome platable. Air- and flame-hardenable. Hardness first layer: approx. 56-59 HRC, depending on composition. Hardenable to approx. 60 HRC. Suitable for material Nos.: 1.2379 • 1.2080 • 1.2436 • 1.2601 and similar Laser welding fillers JOKE® Fill Spools 50 g, 150 g, 500 g • Rods 300 mm