Driving motors and handpieces - joke Technology GmbH - #3

Text version of the page

8 1 Inno-Check ƒô ƒô ƒô ƒô Bestseller! Tel. +49 (0) 22 04 / 8 39-0 • Fax +49 (0) 22 04 / 8 39-61 • info@joke.de 1. Driving motors and handpieces // 1.1. Ultrasonic lapping and polishing system Ultrasonic lapping and polishing system ENESKA 2-1 45 W for coarse work, such as with sintered diamond files. Experience the pure honing power of the ENESKA 2-1 ENESKA 2-1 - The refined powerhouse Two power settings for every work situation: Pure Power at 45 W in “Unclamp” mode for extremely abrasive work, for example, using sintered diamond files. And then there is fine work capacity with 25 W in “Clamp” mode for working on narrow webs or on edges. Here, it works particularly well with ceramicfibre files. At both power settings, you can make fine adjustments continuously using the power knob. The large display constantly lets you know the current power setting. This enables you to find the best setting for every work situation. During operation, the system constantly monitors its power consumption: When you put less pressure on the tool, the system reduces power; but when you increase pressure, it automatically increases power. At 140 g, this handpiece is very light. You will be able to manipulate its M6 fine thread confidently in every situation. Specially designed tool holders enable the tools to be used to best effect. Combine the ENESKA 2-1 with the new ENESKA 3-2 or an ENESKA 4-1, and you will have an unbeatable team of fully trained specialists ready to set to work in their respective fields. Two power settings: 45 and 25 Watts for all uses Continuous fine adjustment Low-weight handpiece for optimum control Suitable tool holders for best tool performance