Chipping tools
40Pages

{{requestButtons}}

Catalog excerpts

Chipping tools - 1

Chipping tools Overview Milling cutters for processing aluminium, shank Ø 3 mm Carbide milling cutters Sets Carbide milling cutters, shank Ø 3 and 6 mm Gravers, solid carbide metal Steel riffle files Carbide milling cutters, shank Ø 2,35 mm Miniature carbide milling cutters/finishers Ø 1,6 mm Engraver’s milling cutters HSS, shank Ø 3 mm Filing tools Hand deburrers

Open the catalog to page 1
Chipping tools - 2

378 Milling tools Engraver's milling cutters HSS Carbide milling cutters Gravers, solid carbide metal 402 Filing tools Steel needle files Steel riffle files 410 Deburring tools Hand deburrers Reverse deburrers Deburring knife

Open the catalog to page 2
Chipping tools - 3

Engraver’s milling cutters in HSS Milling cutters, shank Ø 1,6 mm Milling cutters, shank Ø 2,35 mm Milling cutters, shank Ø 3,0 mm 400 Gravers 401 Solid carbide microdrills If you have always held the opinion that a milling bur is just a piece of carbide available in various shank and head sizes, you should pay particular attention to the following pages. It is worth checking the milling bur down to its teeth. Ultimately, the type of cut decides what materials it can be best used on (see illustration below). Cutting types of the joke miling cutters: Normal cut Even cutting performance with...

Open the catalog to page 3
Chipping tools - 4

Protection for the eyes Protective goggles • Clear, optically correct, single-piece PC pane • Scratchproof coating • casual design, extremely light (21.5 g) • Protection against general hazards and flying particles (up to 45 m/sec.) • Comfort pads on the temple ends • Soft nose pad Price from Order No. 1 piece Blowing pen A must for every workplace! Possibly the smallest blowing pen in the world. It weighs a mere 20 g and regulates the compressed air perfectly. The small aperture of 3 mm ensures that the air really only goes where it should. A must for every workplace! Price from Order No....

Open the catalog to page 4
Chipping tools - 5

380 Engraver's milling cutters in HSS shank 0 3 mm '/VW'"ioke-technPof°list2020* or contact °'°tiy-Com Sales@joke.de Engraver's milling cutters in HSS Ideal for fine working on steel, cast steel, alloyed and unalloyed, and on non-ferrous metals with high resistance to cutting. Cutting speed: Vmax. 60 - 180 m/min Head dimensions Engraver's milling cutters in HSS, shank 0 3 mm cylinder 0 6 x 10 mm 0 7 x 10 mm sphere Shank 0 x total length Price from Order No. 1 piece 10 pieces wheel, flat

Open the catalog to page 5
Chipping tools - 6

Engraver's milling cutters in HSS shank 0 3 mm Head dimensions pointed cone 70° ^ 0 4 x 2.8 mm Shank 0 x total length Price from Order No. 1 piece 10 pieces matching set Price from Order No. 1 set Speed recommendations for engraver's milling cutters in HSS

Open the catalog to page 6
Chipping tools - 7

Price from Shank 0 x total length Cut Head dimensions Carbide milling cutters/finishers, shank 0 1.6 mm cylinder 0 0.8 x 3.6 mm 0 0.9 x 4.0 mm 0 1.2 x 4.5 mm 0 1.4 x 4.5 mm Packing quantity Order No. 1 piece

Open the catalog to page 7
Chipping tools - 8

Carbide milling cutters/finishers shank 0 1,6 mm Head dimensions Shank 0 x total length Cut Price from Packing quantity Order No. 1 piece cone with safety point 0 1.4 x 6.0 mm 0 1.4 x 9.0 mm cone, round torpedo, conical cylinder, round matching set Price from Order No. 1 set Set of carbide milling cutters/finishers

Open the catalog to page 8
Chipping tools - 9

384 Carbide milling cutters with titanium nitride coating Head dimensions Shank 0 x total length Cut Carbide milling cutters with titanium nitridecoating, shank 0 1.6 mm cylinder 0 1.0 x 4.2 mm 0 1.6 x 19 mm double cut cone, round 0 1.6 x 19 mm double cut The perfect complement High speed handpiece P 320 • max. speed 320,000 rpm • ideal for all filigree tasks (deburring on steel, stainless steel, glass and plastics) • compact, ergonomic shape • rapid tool change Order No. Price Price from Packing quantity Order No. 1 piece

Open the catalog to page 9
Chipping tools - 10

Milling burs made of ceramic material Shank-0 2,35 mm The cutters made of high-performance ceramics are available in a cylindrical, round conical and tree shape. Each shape is available with coarse, medium and fine teeth. The cutters are characterised by a long service life, very good cutting properties, little heating, no smearing or clogging and very quiet running. Optimally suited for processing plastic, rubber, silicone, foam, plaster and acrylic, etc. Recommended speed range: Head dimensions Milling burs made of ceramic, shank 0 2.35 mm Shank 0 x total length Cut Price from Order No. 1...

Open the catalog to page 10
Chipping tools - 11

386 Carbide milling cutters shank 0 2,35 mm Head dimensions Carbide milling cutters,shank 0 2.35 mm cylinder Shank 0 x total length Cut 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal Price from 1 piece 10 pieces 100 pieces diameter diameter/ rotational 10 mm 12 mm Recommended cutting speeds: hardened steels, non-hardened steels, cast steel tainless...

Open the catalog to page 11
Chipping tools - 12

Milling cutters INOX shank 0 3 mm The INOX series milling burs have a specially developed geometry for the growing market demand for stainless steel processing. These new cutters offer genuine advantages owing to their effective milling performance that allows high stock removal on all austenitic, rust- and acid-resistant steels. Up to 100% more cutting performance compared to conventional criss-cross teeth. In addition, the new cutter geometry allows the operator to work more efficiently by reducing heat generation (no annealing colours) at the interface between the cutting edge and the...

Open the catalog to page 12
Chipping tools - 13

4. Chipping tools | 4.1. Milling tools Milling cutters for processing aluminium shank Ø 3 mm Milling cutters for processing aluminium Milling cutters with a coarse cut and a Ø 3 mm shank. For processing non-ferrous metals, aluminium, copper, brass and plastics. Optimally suited for milling work (deburring, welding seam processing, contours, etc.) in mould, machine and model building. Cutting speed: 400 - 1.000 m/min Head dimensions Shank Ø x total length Milling cutters for processing aluminium, shank Ø 3 mm cylinder Ø 3 x 14 mm solid carb. solid carb. solid carb. solid carb. solid carb....

Open the catalog to page 13

All Joke Technology catalogs and technical brochures

  1. ENESKAmobile

    4 Pages

  2. Repair welding

    88 Pages

  3. ENESKAsonic

    4 Pages

  4. ENESKAmicro

    16 Pages

  5. Repair welding

    88 Pages

  6. joke catalogue

    451 Pages

  7. FS katalog

    72 Pages