Safety Handbook - JOKAB SAFETY - #29

Text version of the page

www.jokabsafety.com 2:3 1 2 3 4 5 6 7 8 9 10 11 13 12 Light beams Light grids/curtains ...................... devices Sensors/ switches Two-hand controls Emergency stops Strips Mats – to supervise safety devices! Most safety devices on the market can be connected directly to Pluto units. By using dynamic signals with sensors from Jokab Safety only one input is needed for category 4, .................................................................................................................. is also possible to connect up to 10 sensors in series to a single input on Pluto according to category 4. For example non-contact Eden sensors, Spot light beams and Tina emergency stop buttons can all be connected in series to a single Pluto input. Even mechanical switches can be connected to the 'dynamic' safety circuit using Jokab ............................................................................................................................ that can be used as both inputs and outputs. – to save on inputs! .................. .................. ............................ Two inputs Pluto has inputs for static and dynamic sensors. Several sensors can be connected to one dynamic input in accordance with category 4. IO connections ................................................................................................................ .............. ................ .... both input and output at the same time (e.g. for a reset button with lamp indication) Dynamic signals 1–10 doors with one Eden per door category 4 Dynamic signals 1-10 sensors category 4 Static inputs (mechanical switches) 2 for each door = category 4 input/output