Safety contact rails - bumpers - JOKAB SAFETY - #1

Text version of the page

10:2 www.jokabsafety.com Safety Safety contact rails and bumpers as safety devices for potentially dangerous machines Fields of Application ber protect the inner contact strip in the best way possible against damage and also allow for a contact angle exceeding ±45¢ª. Normally supplied in lengths up to 25 m. Bumpers Bumpers are employed on automatic production lines to minimise danger to both people and machines. The large foam rubber cushions enable long practical braking and run-through distances, thus enabling designers to optimise protection for both personnel and machines. The safety contact strips are mounted inside aluminium profiles which are, in turn, protected by the large foam cushions that are glued to the carrier profile and then sprayed with a thin film of polyurethane which makes the bumper waterproof and helps to minimise wear and tear. The bumpers are delivered mounted to the carrier profile in ordered lengths (0,2 m – 3 m). Safety contact rails Contact edges are used as protection against crushing injuries, for example, moving machine parts, automatic doors. Contact edges with cast-in contact strips Our new contact edges consist of a rubber profile with a cast-in contact strip. They are made up simply using connection plugs that are glued to the ends together with a terminal cap. The rubber profile is fitted on an aluminium profile. Available in EPDM design. Supplied in lengths up to 25 m. Contact edges with contact strips SKS 18 The contact edge consists of a rubber profile with a safety contact strip inside. The contact edge is fitted on an aluminium profile. The special design of rubber profiles of EPDM or NBR rubcontact rails Approvals: Protection against squeezing accidents on moving machine parts and automatic doors. Utilization: Features: Can be connected to a safety relay, Vital or Pluto Supplied in customized lengths IP 65 Simple assembly on site Lengths up to 25 m. Contact! & bumpers