Drinks Dispense And Pure Water Super Speedfit Fittings, Valves and Tubing - 36 Pages

Add to MyDirectIndustry favorites
Drinks Dispense And Pure Water Super Speedfit Fittings, Valves and Tubing
  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

Catalog excerpts

Drinks Dispense And Pure Water Super Speedfit Fittings, Valves and Tubing

 Open the catalog to page 1

The John Guest Group has a long established reputation as a world leading manufacturer of push-fit fittings, tube and other fluid control products. A reputation built on producing consistently high quality products with an ongoing commitment to value engineering and product development. Quality Manufacture A commitment to quality is at the heart of the John Guest philosophy. The strictest control is maintained by virtue of the fact that design and manufacture is carried out in modern purpose built manufacturing centres in West London and at Maidenhead in Berkshire. Maintaining control over the...

 Open the catalog to page 2

John Guest offer the widest range of push-fit fittings, tube and other fluid control products for drinks dispense and pure water applications. The world’s first food quality push in fitting, the John Guest range is now over 800 items strong and provides the quickest and most effective of installations. Pushing the tube into the fitting is all that is needed to produce an instant but permanent leakproof connection. The fittings are just as easy to disconnect and re use without the need for replacement parts. The products in this catalogue are produced in FDA compliant materials making them especially...

 Open the catalog to page 3

Contents How to make a connection Technical Specification Inch Size Fittings PI Fittings Grey acetal for liquids and inert gases. White acetal for pure water and other potable liquids. White polypropylene for pure water and a wide range of applications. Superseal Fittings Grey acetal for use with stainless steel tube. Brass fittings for beverage dispense applications. Metric to Imperial Adaptors Metric to Imperial Adaptors Converts metric sizes to inch and inch sizes to metric.

 Open the catalog to page 4

Metric Size Fittings CM Fittings For drinks and other potable liquids. Black acetal for liquids and inert gases White polypropylene for pure water and a wide range of applications Valves, LLDPE Tube and Accessories Angle Stop Valves and Elbow Stop Valves White and Grey Acetal White polypropylene and grey acetal Check Valves & Service Valves Single and Double Check Valves and Service Valves LLDPE Tube Inch and metric sizes in 9 colours From Collet Covers to Tube Cutters

 Open the catalog to page 5

How Super Speedfit Works To make a connection, the tube is simply pushed in by hand; the unique patented John Guest collet locking system then holds the tube firmly in place without deforming it or restricting flow. Materials of construction Super Speedfit fittings are made up of three components: Bodies are produced in an acetal copolymer or polypropylene. ‘O’ rings are Nitrile rubber or EPDM. Collets are produced in acetal copolymer or polypropylene with stainless steel teeth. Grips before it seals ‘O’ ring provides a leakproof seal The Collet (gripper) has stainless steel teeth which hold the...

 Open the catalog to page 6

Typical Bar Installation Super Speedfit push-in fittings have been designed for a wide range of industrial applications. They provide a fast and secure way of connecting tubes and offer considerable advantages over conventional fittings. Complex tubing systems can be assembled more rapidly than with traditional methods and because Super Speedfit fittings are easy to disconnect, fault finding and maintenance become a much easier operation. Bulkhead Connector Female Adaptors Angle Stop Valve Strain Relief Boot Stem Elbow

 Open the catalog to page 7

Grey Acetal Fittings PI fittings offered in sizes 5/32” to 5/8” are manufactured in grey acetal copolymer, making them especially suitable for applications involving foodstuffs and potable liquids. They are however equally suitable for air and inert gases and can be used on N2/CO2 (installed in accordance with The British Beer and Pub Association Code of Practice) mixed gas dispense lines and in pneumatic applications and vacuum. Technical information shown on page 34. & inert gases STRAIGHT ADAPTOR BSPT Thread THREAD BSPT STRAIGHT ADAPTOR 3/8” x 1/4” has special large seal for use with chamfered...

 Open the catalog to page 8

RIGID ELBOW Parallel Thread EQUAL ELBOW OUTLET ADAPTOR NPTF Thread Blue Collet THREAD NPTF EQUAL STRAIGHT CONNECTOR EQUAL TEE REDUCING ELBOW PART NO. REDUCING STRAIGHT CONNECTOR STEM ELBOW PART NO. TUBE OD TUBE OD ENDS BRANCH Accessories for PI Fittings are shown on page 33.

 Open the catalog to page 9

Adaptability SWIVEL ELBOW BSPT Thread THREAD BSPT NPTF Thread NPTF Thread THREAD BSPT THREAD NPTF BSPT Thread THREAD BSPT THREAD NPTF BSPT Thread SWIVEL ELBOW NPTF Thread THREAD NPTF * Obtained by using an Equal Tee shown on page 3 and a Stem Adaptor, shown on page 11. John Guest Adaptability Standard Super Speedfit products can be coupled together to form integral new fittings. STRAIN RELIEF BOOT To suit most 3/8” or 1/2” fittings. The Strain Relief Boot has been developed to reduce the potential strain on the tubing. The Boot limits the bend radius of the tube, preventing it from kinking.

 Open the catalog to page 10

Female Adaptors FEMALE ADAPTOR FEMALE ADAPTOR British Whitworth Thread FEMALE ADAPTOR FEMALE ADAPTOR FEMALE ADAPTOR NPTF Thread PART NO. THREAD NPTF FEMALE ADAPTOR BSP Thread Small Cone End FEMALE ADAPTOR KEG BEER OUTLET ADAPTOR Typically used on beer outlet/gas inlet of keg couplers. Cone supports ‘Top Hat’ type Duck Bill Valve.

 Open the catalog to page 11

REDUCING BULKHEAD CONNECTOR TUBE ODTUBE OD OUTLET INLET British Nipple Type STEM ADAPTOR TUBE TO HOSE STEM THREE WAY DIVIDER STEM ADAPTOR BSPT Thread TUBE OD TUBE OD OUTLET INLET TWO-WAY DIVIDER THREAD BSPT TUBE TO HOSE STEM STEM ADAPTOR Long Version UNEQUAL TWO-WAY DIVIDER TUBE TO HOSE ELBOW TUBE OD TUBE OD INLET OUTLET STEM ADAPTOR BULKHEAD CONNECTOR NPTF Thread THREAD NPTF Adaptors to convert to Metric sizes are shown on page 19.

 Open the catalog to page 12

OFFSET CONNECTOR PART NO. TUBE STEM PART NO. TUBE TUBE COOLING MANIFOLD TUBE SIZE TUBE SIZE ENDS BRANCHES PART NO. STEM TUBE The photograph shows 1/2" size. Existing 1/2 inch ID lines can be accommodated by using a standard Tube to Hose Connector. DISPENSING VALVE ELBOW Recirculation System. 15mm ports directs a proportion of recirculation water around a 3/8" looped spur. dependent on a number of variables so it is recommended that suitability is assessed against the customer's DISPENSING VALVE STEM / flft ^Accessories for PI Fittings are

 Open the catalog to page 13

All JOHN GUEST catalogs and technical brochures

  1. ROOM PACK

    16 Pages

    En
  2. Cartridge Systeme

    12 Pages

    En