FSMG Casting cooler
1Pages

{{requestButtons}}

Catalog excerpts

FSMG Casting cooler - 1

FSMG Casting cooler FSMG casting coolers are closed heavy duty resonance-type conveyors with many special design features. They are typically installed in the foundries operating a green sand mouldline. The FSMG casting cooler is directly installed after the shake-out conveyor. Basically, these machines are mass-compensated resonance type conveyors. Active mass compensation blocks are installed under the trough in a regular distance to compensate the dynamic forces within the machine; this avoids transmission of excessive dynamic forces in the foundation. The conveying trough vibrates at very low frequencies and a moderate stroke. The vibrating parameters are built that the castings do not jump but slide smoothly and slowly. The machine is driven via eccentric crank drive unit with a belt drive. The vibrating trough is closed with a hood and designed to be air proof. A high velocity counter-current cooling air flow is forced towards the flow channel of the casting conveyors against the flow direction of the castings to cool them down from approx. 600°C to 80°C. If demanded, the cooling process could be supported by a temperature probe controlled, pulse width regulated water injection system. Standard widths: 1600,1800,2000,2500 und 3200 mm. Lengths up to 60.000 mm. Properties: + Minor transmission of dynamic forces in the basement + Quite, smooth conveying process, no micro throw movements + Lengths deliverable up to 60m in one piece + Machine could be separated easily for transport and erection, low height of constrution + No concrete filled pieces inside the machine, massive steel construction + Low energy consumption + Safe operation and start up under high load + Individual calculation for the customers with a special software under the consideration of all given parameters + Thermo dynamic and energetic the state of the art cooling principle + Best possible cooling air consumption / casting cooling result ratio JÖST GmbH + Co. KG Gewerbestrasse 28-32 48249 Dülmen Fon +49 2590 98-0 www.joest.com info@joest.co

Open the catalog to page 1

All JÖST catalogs and technical brochures

  1. recycling

    6 Pages

  2. JT.006.10.04

    1 Pages

  3. JT.007.12.02

    1 Pages

  4. JT.004.10.04

    1 Pages

  5. JT.002.10.05

    1 Pages

  6. JT.003.01.01

    1 Pages

  7. JT.008.11.05

    1 Pages

Archived catalogs