Catalogue - Hydraulic UTM - Jinan Testing Equipment - (Version JPG)

See other catalogues for Jinan Testing Equipment

Test set, Impact tester, Testing machine, Drop tester, Vickers hardness tester

Text version of the page

Technical Specifications:


	WAW-50	WAW-100	WAW-300	WAW-300C	WAW-600	WAW-600C	WAW-1000A	WAW-1000C	WAW-2000
Max. Capacity (kN)	50	100	300		600		1000		2000
Max. Capacity (kN)	In steps of 4 or 6
Load Accuracy	±1.0%
Max. Tension Distance (Including travel of piston (mm)	600	600	550	800	600	900	780	900	850
Computer Data Processing	Upper & lower yield point, Max load point, testing load of breaking point, stress, deformation, elongation rate, elastic module & Rp0.2.etc.
Clamping Thickness of Flat Specimen (mm)	0—15	0—15	0—15		0—30		0—40	0—55	0—50
Clamping Diameter for Round Specimen (mm)	03—14	06—22	010—32		013—40		013—60	012—60	015—70
Clamping Diameter for shouldered Round Specimen (mm)	—	—	013 018	—	013, 018 024	—	018, 024 028
Threaded Round Specimen, Specification of Thread (mm)			M16		M16
Max. Compression test space (Excluding test bench)(mm)	^0-355		0-300		0-300	0-800	^0-780	^0-800	^0-800
Size of compression plates (mm)	0125	0125	0120	0120	204x204	204x204	204 x 204	204 x 204	204 x204
Width of Bending supports (mm)	100	100	140				140	140
Permissible Bending (mm)	80	80	100	100	100	100	120	120	160
Diameter of shearing (mm)	10	10	10	10	10	10	10	10	10 special
Effective distance between two columns of tension space (mm)	395mm	395mm	590mm		^580mm		675 x 355 mm
Adjusting speed for test space (mm/min)		200		120
Motor power (kW)	1.5	1.5	2.0	2.6	2.0	2.6	2.0
Weight (kG)	1000	1000	2200	2300	2500	3500	5000	6080	11900
Overall dimensions of Main unit (including max. stroke of piston) mm³	610x700x2750		1250x660x 2987	900x600x 2550	1255x660 x3290	1100x120 0 x2933	1250x900 x3900	800x1320 x3100	1510x1040 x4700