Workholding Components - 56 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

Catalogue excerpts

WORKHOLDING COMPONENTS WORKHOLDING COMPONENTS

 Open the catalogue to page 1

Clamp AssembliesMiniature Flat Fast-acting clamp for light-duty holding. Includes strap, knurled thumb screw, spherical washer, stud, plain flat washer, three hex jam nuts and spring. Features free swinging adjustments for positioning the assembly without interference. Part Number Miniature Radius WORKHOLDING COMPONENTS A light-duty clamp assembly for clamping close to the edge. Complete with radius strap, double jam nuts with spherical washers, finger tip, quick-action knurled thumb screw heel rest, stud, spring and washer. The latter allows free swinging and lateral adjustments for easier set-ups. Part...

 Open the catalogue to page 2

WORKHOLDING COMPONENTS WORKHOLDING SOLUTIONS GROUP Clamp Assemblies Flange Nut Heavy-duty clamping with spherical flange nut and spherical washer for greater flexibility. Extra long, true milled slot allows more clearance for placing and removing work. Brass and plastic pads are available, see page 245. Part Thread Wt. Number A B C D E F G* Size (lbs) *G dimension represents an optimum dimension. † Does not include finger handle. See page 244. WORKHOLDING COMPONENTS Use where great clamping pressures are needed and vibration is a problem. *G dimension represents an optimum dimension. † Does not...

 Open the catalogue to page 3

Clamp AssembliesDouble Cam Features fast-action, light-duty holding of plain surface work where quick movements are required in a restricted space. Long end slot for lateral adjustment. Spring-loaded stud member under sturdy double-cam lever. Plastic and brass pads available for protecting workpiece, see page 245. WORKHOLDING COMPONENTS Double Cam Clamp Assemblies W/Radius Nose Strap Same fast-action as Standard Double Cam Clamp but with a radius strap. Double Cam Clamp Assemblies W/Double End Radius Nose Strap Part Number Double Cam Clamp featuring a radius at both ends of the strap. 12524    1...

 Open the catalogue to page 4

Clamp AssembliesKnob Designed for light-duty clamping, the hand knob eliminates wrenching for faster work changes. Spherical washer allows for clamping irregular surfaces. • Interchangeable pad option • Steel pad standard, brass and plastic pads are available, see page 245 • Pads machinable to part configuration *G dimension represents an optimum dimension. f Does not include finger handle. See page 244. Knob Clamp Assemblies W/Radius Nose Strap WORKHOLDING COMPONENTS Part Number *G dimension represents an optimum dimension. f Does not include finger handle. See page 244. Phone: 877-426-2504 |...

 Open the catalogue to page 5

WORKHOLDING COMPONENTS Jepgens. WORKHOLDING SOLUTIONS GROUP Clamp Assemblies ComponentsFinger Handles Part Number WORKHOLDING COMPONENTS Part Number Clamp Assembly Guide Blocks Part Number Material: Low Carbon Steel Finish: Black Oxide Heat Treat: Case Hardened 74-77 R30N Mounting Screws Supplied with Heel. Hand Knob Screws Material: Stem, Stressproof® Head, Cast Iron Finish: Stem, Black Oxide Head, Zinc Plate • Thread: 2A-UNC    - Part Number Designed for applications where thumb screws are too light, and a heavier, larger unit is needed. Cast iron knob, dog point end. Jergens, Inc. | 15700 S....

 Open the catalogue to page 6

Strap Pads-Steel, Plastic & Brass Material: Steel, Low Carbon Steel Plastic, Paper Filled Bakelite Brass Finish: Steel Pad Only, Black Oxide Heat Treat: Steel Pad Only, Case Hardened 74-77 R30N Plastic Pads Resistant to oil and cutting fluids, allows high clamping pressures, yet protects the soft materials from being scratched or marred. Double Cams Slip standard pipe over handle for more leverage. Snug fit at handle collar and end. • Finish: Black Oxide • Material: C1020 • Heat Treat: Case Hardened 74-77 R30N Forged, heat-treated for abrasion-resistance and longer life. Designed for quick change...

 Open the catalogue to page 7

Revolving Clamp Assemblies Quick hold-down of workpiece with hand tightening, then loosen and revolve out of the way. Saves time for moderate-duty clamping. Malleable cast iron body. Case-hardened swivel pad uses “tru-center” feature to maintain even, in-line pressure on workpiece. WORKHOLDING COMPONENTS • Body Material: Malleable ASTM A47, GR32510 • Finish: Black Oxide • Bushings: Hardened & Ground Rc 56-60 Part Number • Body Material: Malleable ASTM A47, GR32510 • Finish: Black Oxide • Bushings: Hardened & Ground Rc 56-60 Revolving Clamp Base (for use with Short Bushing Type only) Jergens, Inc....

 Open the catalogue to page 8

Hook Clamp Assemblies Moderate to heavy-duty holding power in close quarters. When released, the hook clamp swings quickly and easily out of the way for fast maneuvering of work. Spring-loaded shank for speedy clamp release. Hook Clamp Assemblies Alternative to the above assembly, features flush-mounted socket screw instead of acorn nut. Designed for limited space applications and moderate holding power. • Material: Cast Steel Body, 4140 • Finish: Black Oxide • Heat Treat: Rc 42-46 • Screw: Furnished WORKHOLDING COMPONENTS Part Number Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com...

 Open the catalogue to page 9

Swing Bolts (Latch Bolt) Part Number WORKHOLDING COMPONENTS Part Number Swing Bolts (Latch Bolt) Stainless Steel • Material: 303 Stainless • Thread: Class 2A-UNC Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

 Open the catalogue to page 10

WORKHOLDING COMPONENTS WORKHOLDING SOLUTIONS GROUP Rod Ends Part Thread Wt. Number A B C E F (lbs) 35301* 1/4-20 • Material: Alloy Steel • Finish: Black Oxide • Heat Treat: 32-36 Rc • Thread: Class 2A-UNC * 150,000 PSI Tensile Rod Ends are forged and finished for applications not requiring flat contact with the head. All holes are reamed. Rod Ends can be used with spherical flange assemblies, flange nuts and clamp assemblies. Stainless Steel • Material: 303 Stainless • Thread Class 2A-UNC WORKHOLDING COMPONENTS Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergens

 Open the catalogue to page 11

WORKHOLDING COMPONENTS Quarter Turn Screws • Material: Stem, Low Carbon Steel Head, Low Carbon Steel • Finish: Black Oxide • Thread: 2A-UNC (inch); Class 6g (Metric) 2A-UNF (10-32) Part Number Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

 Open the catalogue to page 12

All Jergens Inc. catalogues and technical brochures

  1. Vises

    46 Pages

    En
  2. Power Clamping

    68 Pages

    En
  3. Ball Lock

    6 Pages

    En
  4. Vises

    46 Pages

    En
  5. Specialty Fasteners

    192 Pages

    En
  6. Lift-ID Sheet

    2 Pages

    En
  7. Hyd Vise Info

    1 Pages

    En
  8. Jer Vise FandB

    1 Pages

    En
  9. Jer Vise Sys

    1 Pages

    En

Archived catalogues

  1. Master Catalog

    497 Pages

    En
  2. Hoist Rings

    28 Pages

    En
  3. Staylock Clamps

    16 Pages

    En