LIFTING SOLUTIONS | MASTER CATALOG WORKHOLDING SOLUTIONS SPECIALTY FASTENERS LIFTING SOLUTIONS 15700 S. Waterloo Road. Cleveland, OH 44110-3898 877.440.LIFT |

Quality Control for Safety’s Sake Our quality control procedures define the entire manufacturing process and provide complete traceability from raw materials, tested in our metallurgical lab, to finished product. Our stateof-the-art, 110,000 square foot facility is ISO 9001:2008 rated, and our center and side pull hoist rings are CE certified. Finally, all hoist rings conform to: (OSHA) 29 CFR 1918, ASME B30-26, MIL-STD-1365C, MIL-STD-209K. Made Quality Jergens hoist rings are made the way they should be: right here in the USA, starting with domestically-produced, certified alloy steel. Choose...

COMPANY INFORMATION Jergens Inc. was founded in 1942 by Jack Schron, Sr. and his father Christy, to provide standard components for building jigs and fixtures. Today the fourth generation of family involvement continues stronger than ever. Throughout it’s 75-year history the company has grown into four separate operating divisions: Tooling Component Division (TCD), Jergens Industrial Supply (JIS), Acme Industrial Company (AIC), and Advanced Systems Group (ASG) Division of Jergens. While all divisions are vital to the Jergens family, the TCD Division is the centerpiece of our manufacturing capabilities....

COMPANY INFORMATION Distribution of Jergens Products Jergens is proud to be represented by a network of qualified distributors throughout the world. If you do not know the name of the distributor nearest you, please call Jergens Customer Service at 1-877-486-1454 or visit www.jergensinc.com/sales-rep-locator. Quality Policy Jergens, Inc. manufactures and supplies only quality products. Our quality system is ISO 9001: 2008 Certified. Center-Pull and Side-Pull Hoist Rings are CE Certified. If there is a problem with any of our products, please contact your local Jergens Distributor or contact our...

LIFTING SOLUTIONS Lifting Solutions

LIFTING SOLUTIONS LIFTING SOLUTIONS GROUP Jergens recommends the use of swiveling and pivoting hoist rings. Conventional eye bolts should be used for straight vertical lifts only. Are you using the proper hoist ring for the application? Is the hoist ring free to swivel and pivot? Any movement restrictions? Are lifting hole(s) in the proper location? Do you have the correct hole size for the hardware - safe lift capacity? Are the holes tapped deep enough to assure full thread engagement? (See figure #3 on Installation Information; page 7.) • Recommended thread depth: teel – 1-1/2 times the bolt...

INSTALLATION DATA LIFTING SOLUTIONS GROUP Installation Information Select the proper Hoist Ring for the job. Do not attempt to apply more than the rated load capacity. The load capacity is marked on the Hoist Ring. Always tighten the bolt to the proper torque value, which is stamped on the Hoist Ring. Drill and tap the workpiece so that the hoist ring bolt is installed perpendicular to the surface of the workpiece. Countersink the tapped hole to prevent “swelling” of the top thread when the hoist ring bolt is torqued. The workpiece surface must be flat, providing complete contact for the hoist...

LIFTING SOLUTIONS LIFTING SOLUTIONS GROUP Shackle-Lok Shackle-Style Hoist Rings ™ Shackle-Lok™ combines the strength of a hoist ring with the versatility of a shackle. Its unique, 3-piece design is ideal for use with a variety of lift methods, and shackles are interchangeable. Shackle-Lok™ is simply the industry’s most efficient below-the-hook lifting device from a weight to load rating ratio. Features & Benefits: LIF TING SOLUTIONS • Internal ball bearings allow for smooth rotation under load • Full 360° swivel and 180° pivot action • Easy to remove shackle • Rated 5:1 strength factor in vertical...

LIFTING SOLUTIONS LIFTING SOLUTIONS GROUP Shackle-Lok Shackle-Style Hoist Rings ™ The Shackle-Lok was designed to work with numerous thread sizes. Any straight thread size, pitch, or length can be manufactured to meet application needs. ™ Note: When tightening the bolt, the shackle and pin must be removed. Not intended for prolonged rotation Width Weight (lbs) Inside Inside Shackle Pin Hole Pin Hole Web No No With Thread Shackle Shackle With Thread Load Dia Thick Torque With No With No Hex Size Capacity Shackle Shackle Length Radius Dia Size Shackle Shackle Clearance to Base (J) (ft lbs) Shackle...

LIFTING SOLUTIONS LIFTING SOLUTIONS GROUP Lift-Check Hoist Rings ™ The NEW Jergens Lift-Check™ hoist ring assures that your application is secure and ready to lift. The Lift-Check™ is comprised of a Jergens’ patent pending proprietary hex head cap screw which integrates the Visual Tension Indicator. Features & Benefits: LIF TING SOLUTIONS • Patent pending Lift-Check™ Center Pull Hoist Rings are rated at 5:1 strength Factor & Proof tested to 200% of rated load capacity, certificate of proof test provided, in accordance with ASME B30.26. • Visual Tension Indicator confirms engagement – clearly...

LIFTING SOLUTIONS LIFTING SOLUTIONS GROUP Lift-Check Hoist Rings ™ • Center Pull Hoist Rings are rated at 5:1 strength Factor & Proof tested to 200% of rated load capacity, in accordance with ASME B30.26*. • Full 360° Swivel and 180° Pivot Action • Material: Alloy Steel • Finish: Black Oxide (Except Washer and Bolt) C THREAD LENGTH • Washer and Bolt: Zinc Plated • U-Bar, Bolt, Pins, Base, Washer and Bushing are Magnetic Particle Inspected Standard U-Bar Long U-Bar *Temperature variations may apply (-20 °C to 75 °C / -4 °F to 168 °F). Lift-Check Bolt Replacement Kits ™ Patent pending Lift Check...

LIFTING SOLUTIONS LIFTING SOLUTIONS GROUP Center-Pull Traditional Style • Full 360° Swivel and 180° Pivot Action • Rated at 5:1 Strength Factor • Material: Alloy Steel • Finish: Black Oxide (Except Washer) • U-Bar, Bolt, Pins, Base, Washer and Bushing ­ are Magnetic Particle Inspected • Washer: Zinc Plated with Gold Colored (Inch), Clear/Blue (Metric) Conversion Coating • Proof Tested to 200% of Rated Load Capacity • Certificate of Proof Test provided (See sample on page 29) • 3D Solid Models available in multiple formats from www.jergensinc.com • Available with Envirolox™ protective finish....