Workholding Components - Jergens & Acme - #42

Text version of the page

6 Jergens, Inc. • Jergens Way • 15700 S. Waterloo Road • Cleveland, Ohio 44110-3898 USA WORKHOLDING COMPONENTS www.jergensinc.com 6.42 Replaceable Grippers The Jergens Replaceable Grippers are available in Hardened High Speed Tool Steel or with Carbide Inserts. The points of the grippers embed themselves into the work piece giving greater holding power with less actual pressure. Jergens Grippers may be held in place using either a set screw on the flat of the gripper or the threaded hole in the back of the gripper. Use Jergens Grippers to make hardened serrated jaws from Jergens soft top jaws or add the grippers to Jergens strap clamps for extra holding power. Use Jergens replaceable grippers anywhere that rough surfaces are being held in position for machining. • Material: High Speed Tool Steel • Finish: Black Oxide • Heat Treat: Rc 60-62 • Serrations: .09" x 90° • Available in FixtureProTM Design Software • Material: Body, Low Carbon Steel Insert, Carbide • Finish: Zinc Plate • Serrations: .09" x 90° • Available in FixtureProTM Design Software ROUND GRIPPERS SQUARE GRIPPERS Wt. Part (lbs) Number Style A B C E 10 Pcs. 23710 Round 3/8 3/8 3/8 10-32 x 3/8 .15 23711 Round 1/2 3/8 1/2 10-32 x 3/8 .20 23712 Round 1/2 1/2 1/2 10-32 x 1/2 .22 23713 Round 1/2 21/32 1/2 10-32 x .651 .30 23714 Round 5/8 3/8 5/8 1/4-28 x 3/8 .36 23715 Round 3/4 3/8 3/4 1/4-28 x 3/8 .44 23716 Square 1/2 3/8 1/2 10-32 x 3/8 .30 Wt. Part (lbs) Number Style A B C E 10 Pcs. 23708 Round 3/8 3/8 5/16 10-32 x 7/32 .15 23707 Round 1/2 3/8 3/8 10-32 x 7/32 .20 23702 Round 1/2 1/2 3/8 10-32 x 11/32 .22 23703 Round 1/2 21/32 3/8 10-32 x 7/16 .30 23704 Round 5/8 3/8 1/2 1/4-28 x 7/32 .36 23705 Round 3/4 3/8 5/8 1/4-28 x 7/32 .44 23706 Square 1/2 3/8 13/32 10-32 x 1/4 .30 Hardened Tool Steel Grippers Carbide Tipped Grippers