Vises - Jergens & Acme - #8

Text version of the page

Jergens, Inc. • Jergens Way • 15700 S. Waterloo Road • Cleveland, Ohio 44110-3898 USA Production Vises www.jergensinc.com 2.8 2 4.00 1.22 3.370 ±0.001 0.75 15.00 6.00 12.00 3.00 6.00 7.92 20mm Primary Liners (2) Plcs Clearance Hole For Holddown 100 30 85.6 20 380 150 300 75 150 200 20mm Primary Liners (2) Plcs Clearance Hole For Holddown 0.38 [10] 0.96 [24] 3.438 [87.5] 3.00 1.68 [73] 1.22 [30] [190] 7.50 0.25 [6] 0.50 0.81 [12] [20] 2.50 [56] [64] 2.20 [176] 7.00 4.00 [100] [20 MAX.] .80 MAX. 15.00 [380] [6.4] .25 Machinable Area [10] 0.96 [24] 3.438 [87.5] 1.68 [73] 1.22 [30] 0.25 [6] 0.50 0.81 [12] [20] 2.50 [56] [64] 2.20 [176] 7.00 4.00 [100] [20 MAX.] .80 MAX. 15.00 [380] [6.4] .25 Machinable Area Production Vises - 4" (100mm) Ball Lock™ Base The Ball Lock Base Vise is for use with the Jergens Ball Lock Quick Change Mounting System. The base has a “jig saw” pattern to allow the vises to be mounted close to each other. For more information about Ball Lock, see page 2.6-2.7 Vise With Machinable Soft Jaws Vise With Hard Jaw Carrier Set and hardened steel inserts Mounting Dimensions Clamping Force Jergens 4" (100mm) Torque Clamping Force ft. lbs. N•m lbs. kgf 20 27 3,600 1,630 30 41 4,500 2,040 40 54 5,300 2,400 50 68 6,200 2,800 60 81 7,200* 3,250* *Recommended Maximum Features and Benefits: • Compact design in 3 extruded aluminum base styles for easy setup and to reduce weight on worktable. • Fully sealed, patented lead screw assembly for long maintenance free service. Openings allow chips to flow out of the vise base. • Hardened steel rails, ground within ±0.001” (0.025mm) provide precise location, resist wear and provide strong support to jaws. Ball Lock Shank Shank Part No. Wt. Part No. Size 69405 14 kg 49651 20mm X 20mm Ball Lock Shank Shank Part No. Wt. Part No. Size 49405 31 lbs. 49601 20mm X 3/4" Inch Metric Maximum Clamping Range With Shaped Jaws Dual Station: 6.75" (170mm) Single Station: 14.40" (365mm) • Supplied with aluminum soft jaws, fully machineable and reversible. Additional jaws can be ordered separately, see page 2.36. Alternate jaw types can be ordered with the vise base by adding the following suffix to the part numbers: -H for Jaw Carrier Set with Hardened Steel Inserts -S for machineable Steel Jaws -T for extra Tall aluminum jaws sets -W for extra Wide aluminum jaw sets