Vises - Jergens & Acme - #18

Text version of the page

Jergens, Inc. • Jergens Way • 15700 S. Waterloo Road • Cleveland, Ohio 44110-3898 USA Production Vises www.jergensinc.com 2.18 2 Production Vise Columns - 6" (150mm) • 3 or 4-Sided Columns • Multiple mounting systems • Fastest quick-change jaw system • Full jaw travel • Hardened and ground steel rails support jaws and resist wear • Fully sealed lead screw assembly • Supplied with machinable soft jaws • Available with hard jaws 1.75 [38] 4.00 [100] 10.00 [248] .96 [24] .50 TYP [12] 4.50 [114] .60 [15] 5.00 [127] 10.00 [254] 3.00 [78] .25 [6] 1.45 [37] Machinable Area .56 [14] 22.56 [573] 11.00 [280] 1.00 [25] 3.50 [88] 1.00 [25] Column With Soft Jaws Column With Hard Jaws Production Vise Columns - 6" (150mm) 4-sided J Q H Ball Lock Mtg. Pattern The 4-Sided Columns are the workhorses of the Jergens Production Vise Columns. They have eight stations for holding your parts. Two standard bases are available. The universal base will mount directly to most HMC tables, using the provided mounting holes on 80MM or 100MM centers. Further reduce set-up times by adding the Jergens Ball Lock™ Mounting System to your HMC. Exchange your vise columns and any other fixture in less than a minute. Location of all fixtures will repeat within ±0.0005” (±0.013mm) or better. Base Base Ball Lock Mounting Mounting Wt. Ball Lock Shank Mounting Part No. H J Q Width Length Mtg Pattern Pattern 1* Pattern 2* (lbs) Part No. Size Ball Lock 49412 11.50 6.00 2.75 15.75 15.75 14 x 14 n/a n/a 244 49602 20mm x 1" Ball Lock 49404 11.50 6.00 2.75 19.68 19.68 17 x 17 n/a n/a 258 49612 25mm x 1" Universal 49476 11.50 6.00 2.75 15.75 15.75 n/a 80MM 100MM 235 - - Base Base Ball Lock Mounting Mounting Wt. Ball Lock Shank Mounting Part No. H J Q Width Length Mtg Pattern Pattern 1* Pattern 2* (kg) Part No. Size Ball Lock 69412 290 150 70 400 400 350 x 350 n/a n/a 111 49652 20mm x 25mm Ball Lock 69404 290 150 70 500 500 425 x 425 n/a n/a 117 49662 20mm x 25mm Universal 69476 290 150 70 400 400 n/a 80MM 100MM 107 - - 4-Sided 6" (150mm) Vise Columns 4-Sided 150mm Vise Columns Metric Bases * Bases on Universal Columns are provided with two sets of mounting holes, to fit grids or T-Slots on 80MM and 100MM centers. Custom mounting patterns and base sizes are available upon request. Torque Clamping Force lbs. ft. N•m lbs. kgf 20 27 3,600 1,630 30 41 4,500 2,040 40 54 5,300 2,400 50 68 6,200 2,800 60 81 7,200 3,250 70 95 8,400 3,800 80 108 9,200 4,150 90 122 10,100* 4,550* *Recommended Maximum Clamping Force Jergens 6" (150mm)