Sodium ISAB - Jenway - #6

Materials Safety Data Sheet

Part No. 025-101, Sodium ISAB

15.0 REGULATORY INFORMATION Labelling according to EU guidelines:

The product has been classified and marked in accordance with EU Directives 99/45/EC and all other EU Directives referred to therein.

C Corrosive

Ammonia Risk Phrases:

34 Causes burns. Safety phrases:

20 When using do not eat or drink.

26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 36/37/39 Wear suitable protective clothing, gloves and eye/face protection.

45 In case of accident or if you feel unwell, seek medical advice immediately (Show the label where possible)

57 Use appropriate container to avoid environmental contamination.

60 This material and its container must be disposed of as hazardous waste.

Water hazard class 3 (Self-assessment); extremely hazardous for water.

22 Harmful ifswallowed.

34 Causes burns.

35 Irritating to eyes.

50 Very toxic to aquatic organisms.

This MSDS should be forwarded immediately to all users of this product within your organisation. If this product is to be re-consigned to another organisation then it is your responsibility to ensure that this MSDS is sent or copied to that organisation. This data sheet must not be construed to be a risk assessment for operations involving this substance. As with any other substance, the user is advised to carry out a risk assessment when working with it. This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. No responsibility can be assumed by Jenway for any damage or injury resulting from abnormal use or from any failure to adhere to recommended practices. Department issuing MSDS: Health & Safety

Version Number A, According to 91/155 EC, Reviewed 21/04/2005

Page 6 of 6