catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Spectrophotometer, Fluorometer, Magnetic stirrer, PH meter, UV spectrophotometer
Text version of the page
| Materials Safety Data Sheet | |||||||||||||||||||||||||||||||||||||||||||||||||
| Part No. 025-405, Ammonia Cyanurate F5 reagent | |||||||||||||||||||||||||||||||||||||||||||||||||
| 7.0 HANDLING AND STORAGE Handling: Information for safe handling: Prevent formation of dust. Thorough dedusting. Information about fire and explosion protection: Protect from heat. Storage: Requirements to be met by storerooms and receptacles: Store in a cool location. Information about storage in one common storage facility: Do not store together with acids. Store away from oxidising agents. Further information about storage conditions: Keep container tightly sealed. Store under dry conditions. Protect from humidity and keep away from water. Storage class: Not required. 8.0 EXPOSURE CONTROLS/PERSONAL PROTECTION | |||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information: The lists that were valid during the compilation were used as basis. Personal protective equipment: General protective and hygienic measures: Keep away from foodstuffs, beverages and food. Take off immediately all contaminated clothing. Wash hands during breaks and at the end of the work. Store protective clothing separately. Avoid contact with the eyes and skin. Respiratory protection: In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air. Recommended filter device for short term use: Filter P2 Protection of hands: Alkaline resistant gloves. Only use chemical-protective gloves with CE-labelling of category III. After use of gloves apply skin-cleaning agents and skin cosmetics. Material of gloves: Nitrile. Recommended thickness of the material: > 0.11 mm. The selection of suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Value for the permeation: Level > 6 (480 min) Eye protection: Tightly sealed safety glasses. Body protection: Alkaline resistant protective clothing. | |||||||||||||||||||||||||||||||||||||||||||||||||
| Version Number A, According to 91/155 EC, Reviewed 28/06/2004 Page3of6 | |||||||||||||||||||||||||||||||||||||||||||||||||