Text version of the page

Preliminary Data Sheet – JN5139-xxx-Myy

IEEE802.15.4/ZigBee Module Family

Overview

Features: Module 2.4GHz IEEE802.15.4 & ZigBee compliant The JN5139-xxx-Myy family is a range of surface mount modules that enable users to implement IEEE802.15.4 or ZigBee compliant systems with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites. The modules use Jennic’s JN5139 wireless microcontroller to provide a comprehensive solution with high radio performance and all RF components included. All that is required to develop and manufacture wireless control or sensing products is to connect a power supply and peripherals such as switches, actuators and sensors, considerably simplifying product development. Three basic hardware module variants are available: JN5139-xxx-M00 with an integrated antenna, JN5139-xxx-M01/M03 with an antenna connector and JN5139-xxx-M02/M04 with a power amplifier and LNA for extended range. Each variant can be provided pre-programmed with a ZigBee network stack (JN5139-Z01-Myy). 2.7-3.6V operation Sleep current (with active sleep timer) 2.8µA JN5139-xxx-M00/01/03 up to 1km range (ext antenna) M00: on board antenna M01: SMA connector M03: uFl connector o Receiver sensitivity –96.5dBm o TX power +2.5dBm o TX current 37mA o RX current 37mA

Module Block Diagram

o 18x30mm JN5139-xxx-M02/04 SMA connector M04: uFl connector up to 4km range M02:
128kB SerialFlash Memory o Receiver sensitivity -100dBm
XTAL o 19dBm TX power o TX current 120mA
Ceramic Antenna Balun RAM96kB ROM192kBRISC CPU JN5139 chip SPI o RX current 45mA
2.4GHz Radio O-QPSKModem 2-wire serial o 18x41mm
External AntennaM00 OptionM01/03 OptionM02/04 Option Connector Balun Timers IEEE802.15.4MACAccelerator UARTs Connector Balun PA / LNA 12-bit ADC,comparators Features: Microcontroller
PowerManagement 128-bit AESEncryptionAccelerator 11-bit DACs,temp sensor 16MHz 32-bit RISC CPU
Power 96kB RAM, 192kB ROM 4-input 12-bit ADC, 2 11-bit DACs, 2 comparators, temperature sensor Benefits Applications 2 Application timer/counters, 3 system timers Microminiature module solutions Robust and secure low power wireless applications Ready to use in products 2 UARTs (one for in-system debug) Minimises product development time Wireless sensor networks, particularly IEEE802.15.4 / ZigBee systems SPI port with 5 selects No RF test required for systems 2-wire serial interface Compliant with FCC part 15 rules, IC Canada, ETSI ETS 300-328 and Japan ARIB STD-T66 Home and commercial building automation 21 GPIO Home networks Evaluation kits available with full, unlimited, Software Development Kit Toys and gaming peripherals Production volumes supplied pre-programmed with application software Industrial systems Temperature range -20°C to +70°C Telemetry and utilities (e.g. AMR) Lead-free and RoHS compliant
Preliminary - JN-DS-JN5139-xxx-Myy 1v3 © Jennic 2008