Compact Photonic Tools Optical Power Meter (cOPM-A1) - JDSU - #1

Text version of the page

Key Features •Operates over wide wavelength range (800 to 1650 nm) •High power capability option can withstand up to 2W • Low PDL <0.01 dB • Bare fiber measurement capability • SCPI-compliant commands over USB automation interface •Auto dark current measurements • Perform simultaneous measurements on multiple wavelengths when used with cORL and cFPL units Applications • Serves as a basic tool for performing laboratory absolute optical power measurements • Performs insertion loss testing of passive optical components • Performs insertion loss testing of connectors and cables • Performs optical powermeasurements in automated alignment stations Compact Photonic Tools Optical Power Meter (cOPM-A1) WEBSITE: www.jdsu.com/test COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS The JDSU Compact Photonic Tools offer a new portfolio of point solutions for fiber optic test applications. The cOPM-A1 Optical Power Meter is optimized for a number of applications ranging from general lab use to test and process automation for passive optical components. It can be used with both single-mode and multimode fiber and offers power levels from –80 to +15 dBm over a wavelength range of 800 to 1650 nm. The cOPM-A1 features high accuracy, high linearity, and extremely low polarization-dependent sensitivity. Similar to the JDSU Multiple Application Platform (MAP-200), the cOPM-A1 detector heads use the AC100 interchangeable detector adapters that are available for most common connector types, as well as a fiber holder that permits bare fiber measurements. The cOPM-A1 Indium-Gallium-Arsenide (InGaAs) Optical Power Meter has a FC connector detector adapter as a standard accessory and an optional integrating sphere, which may be fastened to the front panel for increased power measurements to 33 dBm (2 W) with decreased polarization dependent loss (PDL) to 0.005 dB. A simple, intuitive graphical user interface (GUI) and keypad minimizes training requirements. A universal serial bus (USB) interface may be used for test automation using a PC.While connected by USB, the cOPM-A1 does not require an additional mains connection, reducing cord tangle. The unit comes equipped with internal battery backup for quick measurements around the lab or for use during power outages.