catalogue search
P. 01
P. 02
|
|
You may also be interested in
Epoxy adhesive, Prepreg, Adhesive
Text version of the page
Core: ¼” cell x 0.004” (6.35 mm cell x 0.10 mm) Aluminum Foil Facings: 2 plies L-901-3K70P each side RT FlatwiseTensile Strength:505 PSI (3.5 MPa) RT Sandwich Peel Strength:6 in lb/in (27 N/25 mm) *Sandwich peel strength varies with the orientation of fibers directly against the core and test direction. Fibers laid up parallel with the test direction produce minimum strengths. Fibers laid up perpendicular to the test direction produce maximum strengths. L-901 sandwich peel strength ranges from 5-7 in lb/in (22-31N/25 mm).
NOTICE: Product data and parameters cited in this publication have been obtained in J.D. Lincoln, Inc. laboratories using the materials under carefully controlled conditions. The information, therefore, is believed to be accurate and correctlystated. Data of this type maybe considered to be indicative of representative properties obtainable. J.D. Lincoln, Inc. cannot accept responsibility for the misapplication of these products, nor for their use under uncontrolled conditions. Numerical values resulting from the application of this material are dependant on processing details. It is recommended that the user develop his or her own application techniques and generate data consistent withhis or her specific application and process. L-901
L-901 Woven Graphite Adhesive Prepreg - 54483 Mechanical Data Sandwich Properties*
LAMINATE PROPERTIES PROPERTY50 PSI(0.34 MPa) CURE VACUUM BAG CURETESTMETHOD ULTIMATE TENSILE STRENGTH Room Temperature (RT) 82 KSI (566 MPa)79 KSI (545 MPa)ASTM D638 160°F(71°C)69 KSI (476 MPa)66 KSI (455 MPa)ASTM D638 TENSILE MODULUS Room Temperature (RT) 8.7 MSI (60 GPa) 8.4 MSI (58 GPa) ASTM D638 160°F(71°C)8.3 MSI (57 GPa) 8.1 MSI (56 GPa) ASTM D638 ULTIMATE COMPRESSION STRENGTH Room Temperature (RT) 73 KSI (503 MPa)71 KSI (483 MPa)ASTM D695 160°F(71°C)62 KSI (428 MPa)61 KSI (421 MPa)ASTM D695 COMPRESSION MODULUS Room Temperature (RT) 8.6 MSI (59 MPa) 8.5 MSI (59 MPa) ASTM D695 160°F(71°C)8.1 MSI (56 GPa) 8.1 MSI (56 GPa) ASTM D695 ULTIMATE FLEXURAL STRENGTH Room Temperature (RT) 115 KSI (793 MPa)107 KSI (738 MPa)ASTM D790 160°F(71°C)105 KSI (724 MPa)100 KSI (690 MPa)ASTM D790 FLEXURAL MODULUS Room Temperature (RT) 9.6 MSI (66 GPa) 9.5 MSI (66 GPa) ASTM D790 160°F (71°C)9.0 MSI (62 GPa) 8.8 MSI (61 GPa) ASTM D790 INTERLAMINAR SHEAR STRENGTH Room Temperature (RT) 8.5 KSI (59 MPa)7.4 KSI (51 MPa) ASTM D2344NOTICE: Product data and parameters cited in this publication have been obtained in J.D. Lincoln, Inc. laboratories using the materials under carefully controlled conditions. The information, therefore, is believed to be accurate and correctlystated. Data of this type maybe considered to be indicative of representative properties obtainable. J.D. Lincoln, Inc. cannot accept responsibility for the misapplication of these products, nor for their use under uncontrolled conditions. Numerical values resulting from the application of this material are dependant on processing details. It is recommended that the user develop his or her own application techniques and generate data consistent withhis or her specific application and process. L-901