JAQUET T600 Multitasker tachometer - 8 Pages

Add to MyDirectIndustry favorites
JAQUET T600 Multitasker tachometer

Catalog excerpts

JAQUET T600 MultiTasker multichannel measurement and monitoring instrument for complex and demanding machine protection applica- tions. remote display as option. Features High accuracy speed measurement: 0.002% for limits and 0.1% referenced to 20 mAՕ 2 frequency + 1 analog + 2 binary inputs Direction and creep detection Օ Temperature measurement with PT100 2 current, 4 relay and 2 Open Collector outputs Օ Sensor monitoring for all sensor technologies Ethernet interface - configuration via Javaՙ based software Extensive parameter and limit setting possibilitiesՕ Programmable logical, diagnostic and measurement functions Plug in terminals The T600 Advantage Օ Fast 8 ms relay reaction time on overspeed 4 parameter sets each with 6 System Limits for almost limitless applicationsՕ Logical limit combinations save relays & wiring Acceleration measurementՕ Compatible with all popular sensor types Typical Applications Micro turbine speed measurement and overspeed protectionՕ Diesel engine start control and protection Dual turbocharger speed measurement Օ Equipment in safety critical applications Universal tachometer >

 Open the catalog to page 1

Type and part numbers AC version: T601.50 part number: 384Z-05602 DC version: T601.10 part number: 384Z-05603 > Measurement time Configurable min. measurement time (tM): 2/5/10/20/50/100/200/500 ms, 1/2/5s. Reaction time Current output: Typical tM + 4.1 ms Maximum Input period + tM + 4.1 ms Relays: Typical t + 6 ms Maximum Input period + tM + 6 ms Accuracy Limits / inputs Frequency: 0.002% Current: 0.025% Temperature: 0.5 ˚C Current output 0.1% referenced to 20mA or the end value Max 0.2 % from measuring value + 2 LSB (-40Ѕ+70C) Sensor inputs (2) To measure frequency signals (speed sensors)...

 Open the catalog to page 2

Supply AC version: 90...264 VAC max 14 W / 120...370VDC DC version: 18...36 VDC max 6.8 W Relays (4) To treat the status of System Limits and sensor Limits 4 parameter sets each with 6 System Limits (AND / OR combined values) Hysteresis Freely programmable upper and lower set-points for each limit Function Latching / inversion (fail safe) Contacts Change-over: 230 VAC / max. 0.45 A 125 VAC / max. 1 A 30 VDC / max. 2 A Open Collector outputs (2) Isolated outputs of sensor frequencies: programmable x1, x2 or x4 (subject to 2 channel phase shift). Can also react on System Limits, see above....

 Open the catalog to page 3

Mounting DIN-rail DIN 4622713 (EN 50022) or mounting plate DIN 43660 (46121) Housing Material ABS, color RAL 7035 Terminals Plug-in style Weight AC version: 450 g DC version: 400 g >

 Open the catalog to page 4

T600s allow you the freedom to choose the functions or system configuration that best match your application. As well as being replacements for previous gen-eration tachometers they can process multiple sensors data including frequency, 0/4҅20mA analog, a directly connected PT100 temperature resistor or sensors with limit switches via binary inputs.T600 takes T500 to a higher level. The 2 fre-quency inputs may either be interpreted as speed data or speed and timing signal. Logic analyses and mathematic calculations expand the possibilities.Want to know when a trip occurred? Could you use...

 Open the catalog to page 5

2 CHANNEL TACHOMETER System Limits for simple configuration of complex solutions > Dont lose time by thinking about parallel- and serial wiring, Inverting and double inverting of signals just to get that signal you need. Only think about what signal you finally need and define a System Limit. As shown in the example beside: Needing a TRIP as soon as machine turns clockwise faster as 300 rpm while the temperature is still not at working temperature (temperature of 60ҰC measured on the analog input). After that assign this System Limit to a relay and define its behaviour. I N C H A R G E O F...

 Open the catalog to page 6

The configuration software is stored in the T600 itself. So you never have to think about software version - it will always work with the firmware. The software allows: Fast and user friendly parameter set up. Օ Access to stored parameters. Normal file handling and printing of parameter detailsՕ PC display of measurement, relay and alarm status. Password protection with 3 levelsAll you need is an Ethernet terminal, a crossed Eth-ernet cable (not included) and an internet browser (no internet access needed). > To display measured and calculated values of the T600 Multitasker. A special mode...

 Open the catalog to page 7

JAQUET TECHNOLOGY GROUP offers the worlds most versatile and advanced range of solutions for the detection, measurement, diagnosis and management of rotational speed. Our industry and application specific expertise ensures that you will achieve an op-timum solution. Completely matched to your individual requirements, meeting key industrial standards and certifications, our products help boost the performance of your machinery while reducing cost of ownership. TYPICAL INDUSTRIES SERVED ҕ Automotive and truck Aerospace Օ Diesel / Gas engines Hydraulics Օ Railway Turbines Օ Turbochargers...

 Open the catalog to page 8

All JAQUET Technology Group catalogs and technical brochures

  1. SIL3 Sensor

    4 Pages

  2. Railway Sensors

    4 Pages

  3. Turbotach

    6 Pages

  4. APOLLO

    2 Pages

  5. FTV 10 EX-ATEX

    4 Pages

Archived catalogs

  1. JAQUET MDS4000

    4 Pages