COAXIAL CONNECTORS
13Pages

RoHS Compliant Technology to Inspire Innovation COAXIAL CONNECTORS

COAXIAL CONNECTORS ■ FREQUENCY RANGE TO 18GHz (Straight adapter) SMA series co axial connectors a re small size, with threaded coupling, conforming to the general purpose standards (IEC60169-15) . It enables high density packaging inside equipment, as well as compact interconnection between subassemblies and between units. Applicable frequencies : from DC up to 18GHz (Straight adapter) . High performance with a VSWR of 1.2 or less. •A wide variety of products, Panel mount receptacles, enable diversified mount styles. • Lightweight, compact in size and rugged construction. •A high degree of...

COAXIAL CONNECTORS •Panel Mount • Straight •Panel Mount • Right-angle •Bulkhead • Straight •Panel Mount • Straight P/N : 4 Hole Mount • SMAHOO^D**

COAXIAL CONNECTORS Plug Receptacle ♦Panel Mount • Straight Various adapters are available.

COAXIAL CONNECTORS Panel Mount Type Intermatable with PLUG (15 Page) ■Straight ■ Four-hole Mount PANEL MOUNTING HOLE PATTERNS (REF.] ■Straight ■ Two-hole Mount PANEL MOUNTING HOLE PATTERNS (REF.: ■Right-angle ■ Four-hole Mount PANEL MOUNTING HOLE PATTERNS (REF.)

COAXIAL CONNECTORS Through-hole Solder Type Intermatable with PLUG (15 Page) PC BOARD LAYOUT • MOUNTING SIDE (REF.; PC BOARD LAYOUT • MOUNTING SIDE (REF.)

COAXIAL CONNECTORS Bulkhead Type ■ Panel Mount Type Intermatable with PLUG (15 Page) PANEL MOUNTING HOLE PATTERNS (REFJ (SHRINKAGE TUBE) (Note) The picture on the above shows the SMAK001D37. The shape varies slightly for the SMAK002D37. IPart Number/Dimensions

COAXIAL CONNECTORS Intermatable with RECEPTACLE (12,13 Page) & JACK (14 Page) (SHRINKAGE TUBE) (Note) The picture on the above shows the SMAA002D37. The shapes of other models vary slightly. ■Part Number/Dimensions (Note) Procedure for wire connection-"See pages 113 to 120

COAXIAL CONNECTORS Intermatable with PLUG RECEPTACLE (17 Page) (SHRINKAGE TUBE) (Note) The picture on the above shows the SMAF001D37. The shapes of other models vary slightly. ■Part Number/Dimensions (Note) Procedure for wire connection-"See pages 113 to 120

COAXIAL CONNECTORS SMA S e r i e s PLUG RECEPTACLE Panel Mount Type Intermatable with JACK 16 Page Straight Four-hole Mount Part Number SMAP001D00 PANEL MOUNTING HOLE PATTERNS REF. Straight Two-hole Mount Part Number SMAP002D00 PANEL MOUNTING HOLE PATTERNS REF. Right-angle Four-hole Mount Part Number SMAQ001D00 PANEL MOUNTING HOLE PATTERNS REF.

COAXIAL CONNECTORS IDUST CAP (For Receptacle & Jack) ■With Chain ►Material '. Copper Alloy ■Hexagon Nut Type ■ With Chain ►Material '. Copper Alloy ■Plastic Type

qThe values specified in this catalogue are only for reference. The products and specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon. wUsers are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE s products to the equipment. eThe products presented in this catalogue are designed for the uses recommended below. We strongly suggest you...

Japan Aviation Electronics Industry, Limited 1-19, Aobadai 3-chome, Meguro-ku, Tokyo 153-8539, Japan 142 Technology Drive, Suite 100 Irvine, California 92618-2430, U.S.A. (800) JAE-PART(523-7278)Toll free in U.S.A. except in California and Alaska Coliseum Business Center, Riverside Way, Camberley, Surrey GU15 3YL, U.K. JAE Taiwan, Ltd. <Taipei Branch Office> 4F-1, No.88, Sec.2, Chung Hsiao E.Rd., Taipei, Taiwan, R.O.C. Suites 1407-11,14/F., Tower2, The Gateway, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong RM1407, Shanghai Mart 2299 Yanan Road (West) Shanghai, 200336 P.R.C. 33 Tannery...