Hy~Line and Ultima Lobe Pumps - Jabsco - #51

Text version of the page

2/00 6.109 Hy~Line and Ultima Lobe Pumps An aseptic process is one in which all unwanted micro-organisms are kept out of the fluid stream. This prevents spoiling of sensitive products and ensures that only the intended reactions take place in the process. In the Ultima design, high specification joints are used instead of O-rings ensuring that microbial contaminants cannot enter the product zone. Once the system has been cleaned and sterilised it will remain clean and sterile. For increased security, secondary joints can be fitted to all potential entry points of both Hy~Line and Ultima pumps to allow steam or sterile fluid barriers to be connected. Also, a pump which is externally dirty on the outside will harbour colonies of bacteria which are more likely to infect the internal surfaces of the pump. All Hy~Line and Ultima pumps are designed to be easy to clean externally and are therefore less likely to cause product contamination. Aseptic Operation