Catalogue - QuattroRam - JAB-Becker

See other catalogues for JAB-Becker

Reciprocating compressor, Air compressor, Elevator, Compressor, Lift platform

Text version of the page

4-Ram-Lift

Type:JAB QuattroRam 40 A-Align / QuattroRam 55 A-Align

JAB-Advantages:

• Installation frame and steel cassette separate with adjustable connection

• All forces are spreaded into the floor through installation frame.

• Extremly low drive-on height of 150 or 160 mm

• Spacing for turn tables at the front 900x500x50 mm*

• Spacing for turn tables / sliding plates at the rear 1420x500x50 mm*

• Platforms undergo heat treatment to relieve stresses, and than are machined to give perfectly level measuring surfaces.

• Platforms precise adjustable in length and crosswise direction as well as height

• Measuring and calibration position possible already after 40 mm stroke. Then after all 100 mm.

• Optional: Lighting set and axle lift with 2,6 tons lfiting capacity

• Highest quality and huge life span

• Easy to maintain through best accessibility

• Advise, after sales and maintenance - all through JAB

The hydraulic Four-Ram Lift QuattroRam 40 A-Align has been developed according to the latest requirements of wheel alignment. With an exact height positioning we can fulfil the highest demands of the leading car manufacturers. The lift is suitable for conventional, 3D-dimensional and touchlesse technologies

With the QuattroRam 40 A-Align the complete passenger car range from smallest to largestwheel base can be handled.

With the QuattroRam 55 A-Align we offer a combination version with 5 m platform length, which is suitable to lift small trucks with long wheel base also. Combined with the possibility for wheel alignment.

In measuring and calibration positions, all four rams are mechanically locked.

Technical data


	40 A-Align	55 A-Align
Lifting capacity:	4000 kg	5500 kg
Lifting capacity (for alignment)	4000 kg	4000 kg
Min. wheel base (wheel alignment)	2000 mm	2000 mm
Max. wheel base (wheel alignment)	3500 mm	3500 mm
Accuracy left - right	< 0,5 mm	< 0,5 mm
Accuracy front - rear- diagonal	< 1,0 mm	< 1,0 mm
Length of platform	4350 mm	5000 mm
Width of platform	600 mm	600 mm
Distance of rams crosswise	1500 mm	1500 mm
Distance of rams lengthwise	2800 mm	3500 mm
Guidepistons	4 x90 mm	4x100mm
Hydraulic pistons	4 x 40 mm	4 x 50 mm
Liftingtime	35sec.	45sec.

In case you need any further information, don't hesitate to contact us!

* Turn table and sliding plates not included in our scope of delivery!

JAB — Made in Germany

TOV

J.A. Becker& Söhne - Maschinenfabrik - Postfach 1151 - D-74148 Neckarsulm Telefon +49 (0) 7132 367-0 - Telefax +49 (0) 7132 367-287 Internet: http://www.jab-becker.de/ - E-Mail: info@jab-becker.de

QuattroRam - JAB-Becker - #1

Reciprocating compressor, Air compressor, Elevator, Compressor, Lift platform