NCBG1115G01002
4Pages

Catalog excerpts

Original language: German Brief description The C-TEC 90-10 PM series DC buffer module form J. Schneider uses ultracapacitors for energy storage. In normal operation, these capacitors are charged from an external charging unit. If the supply is interrupted, the energy stored on the ultracapacitors is available to the load as a buffer. The buffer module continues to supply the load until it is discharged. The length of buffer time available is a function of the charge level of the capacitors and the discharge current. The buffer module offers the following advantages: Maintenance-free with long-life ultracapacitors Microcontroller-supported monitoring of the ultracapacitors Operating status monitoring via electrically isolated signals to the charging unit Great mechanical stability (Vibration endurance 3 Hz – 100 Hz, Shock until 50 g and Shock endurance 20 g) made for Wind business Pluggable to realize easy device switching Vibration secured wiring via spring loaded plugs Wide working temperature range -30 °C to 60 °C Subject to technical modifications !

Open the catalog to page 1

J. Schneider Elektrotechnik GmbH J. Schneider Elektrotechnik GmbH info@j-schneider.de Postbank, Karlsruhe BLZ 66010075 Kto. 44 58-753 www.j-schneider.de Dresdner Bank, Offenburg BLZ 68080030 Kto. 0720406100 Geschaftsfuhrer: Dipl.-Betriebswirt (BA) Bettina Schneider ■ Dipl.-Wirtsch.-lng. (FH) Rolf Anti ■ Amtsgericht Freiburg HRB 470758

Open the catalog to page 2

Original language: German Technical data Nominal input voltage Voltage range Parallel connection Series connection 810 V DC (care the Maximum Altitude) Energy content Control circuit voltage Control circuit input current Digital voltage monitoring (VM) output Digital polarity check (PC) output Storage temperature Operating temperature Relative humidity 0 m – 2000 m above sealevel 2000 m – 4000 m above sealevel 4000 m – 8000 m above sealevel Subject to technical modifications !

Open the catalog to page 3

Original language: German Connection data Charge-/ Discharge circuit connections ‘X1’ Spring clamps (push in) 76 A / 1000 V solid 0,2 - 2,5 mm² stranded 0,2 – 2,5 mm² stranded, with ferrule with plastic sleeve 0,2 – 2,5 mm² Stripping length 10 mm stranded, with ferrule without plastic sleeve 0,2 – 2,5 mm² Stripping length 10 mm AWG 24-12 Control circuit terminal connections ‘X2’ Spring clamps (push in) 12 A / 320 V solid 0,2 - 10,0 mm² stranded 0,2 – 6 mm² stranded, with ferrule with plastic sleeve 0,25 – 4 mm² Stripping length 8 mm stranded, with ferrule without plastic sleeve 0,25 – 6 mm²...

Open the catalog to page 4