catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Actuator, Stainless steel actuator, Double acting actuator, Spring-return actuator, Electric actuator
Text version of the page
| Model J3-1100 | |||||||||||||||||||||||||||||||||
| Doc: J3/II00/0I Nov 2007 | |||||||||||||||||||||||||||||||||
| Highly visible LED light gives continuous actuator status indication. J3 L - 12-24V AC/DC J3 H - 80-240V AC/DC Multi-voltage capable with auto-voltage sensing: | |||||||||||||||||||||||||||||||||
| Electrically operated 2 way brass ball valve | |||||||||||||||||||||||||||||||||
| Full bore 2 way nickel plated brass ball valve, designed for automation with integrally cast ISO52II actuator mounting platform fitted with direct mounted J3 electric actuator. Supplied assembled and dry bench function tested. Size range from 1/2" to 2". Valves are WRAS approved for use on potable water. | |||||||||||||||||||||||||||||||||
| Type Function J3-II03 Standard power to open - power to close - Stays put on mains failure J3-II04 Failsafe BSR - Battery Spring Return - Fails to safe position using an internal battery J3-II05 Modulating DPS - Digital Positioning System - Controlled by 4-20mA or 0-I0V signal Applications: Water, oil and most non-corrosive media, subject to compatibility with wetted parts in contact with media. Actuators sized on a maximum differential pressure of I0 bar wet service, if the intended duty is above this differential, or dry (air or gas) call to check actuator sizing as a larger output actuator may be required. NOT recommended for use on steam. Maximum working temperature of assembly is +70C. If the intended duty is a higher temperature than this, select model J3-III0 which has a mounting kit between the valve and actuator which uses air cooling to dissipate the heat away from the actuator (maximum +I30C). Valve Specifications: | |||||||||||||||||||||||||||||||||
| Torque output range: 25~95Nm Break 20~80Nm Reseat Electronic torque limiter -protects against valve jams | |||||||||||||||||||||||||||||||||
| Anti-condensation heater Manual override All connections via external DIN plugs ~ no need to remove cover to connect Volt free end of travel confirmation switches IP65 weatherproof housing CE marked Traceable sequential serial numbering system Optional failsafe kit (Battery Back-up) - actuator fails to safe position on power failure | |||||||||||||||||||||||||||||||||
| Nickel plated brass Nickel plated brass PTFE UTI 2" 40 bar -20 to +I50°C -20 to + 70°C | |||||||||||||||||||||||||||||||||
| Body Ball Seats Pressure rating Valve temp limits Actuator temp limits | |||||||||||||||||||||||||||||||||
| J3 Actuator status light basic functions: | |||||||||||||||||||||||||||||||||
| Constantly lit LED If the actuator is operating correctly with no faults, the LED shows a constantly lit light. | The LED flashes with 2 blinks | The LED flashes on - off When the actuator senses an impending valve jam, the electronic torque limiter is activated and on activation, repeatedly flashes the LED on and off. | |||||||||||||||||||||||||||||||
| Optional modulating kit with digital positioning system, either 0-10V or 4-20mA | |||||||||||||||||||||||||||||||||
| aaaaaa aaaacia: aaaacici | |||||||||||||||||||||||||||||||||