JSC-XX-XXXX-333mV series - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

REVENUE-GRADE SPLIT-CORE CURRENT TRANSFORMER Additional isolation must be provided if used at higher voltages. Additional isolation must be provided if used at higher voltages. Additional isolation must be provided if used at higher voltages. JSC series of split-core current transformer offers 333mV at secondary from sensed primary current. Without using secondary CT inside of meter, users directly connect JSC series to a meter for high accuracy metering application. It enables one meter to be adopted for various current rating by only changing primary CT so it makes compact design meter and reduces developing cost. Also, over-voltage protection circuit is included to offer safe, fast and cost effective installation. APPLICATIONS • Power meter • Switchgear • Distributed measurement systems • General Sets • Control panels • High quality comprehensive measurement • Available in a wide range of transformer ratings • Accuracy up to Class 0.5S BENEFITS • Faster installation • Cost effective • Long product life • Core contact surface is waterproofed, however if it gets rusty, you could reuse after removing rusts with spraying WD-40 or CRC5-56 on the rusted side. • Do not use any other chemicals except WD-40 or CRC5-56 on housing or any other parts. • Customizing output lead wire SPECIFICATION Accuracy System Voltage Overload withstand 1.2 times rated current continuously Compliant with Operating Temperature Range Relative Humidity Test Voltage Frequency Range Protection Level Insulation Category

 Open the catalogue to page 1

CURRENT TRANSFORMER RATIOS / DIMENSIONS How to Order / Model Reference How to Order / Model Reference How to Order / Model Reference Model J S C - 0 1 Primary Current Select code from ratio table Secondary Voltage 333mV Model J S C - 0 2 Primary Current Select code from ratio table Secondary Voltage 333mV Current Transformer Ratios Current Transformer Ratios Metering Burden(VA) Metering Burden(VA) Current Transformer Ratios Model J S C - 0 3 Primary Current Select code from ratio table Secondary Voltage 333mV Accuracy conforms to IEC61869-2 & IEEE/ANSI C57.13 meets the measuring range from 1 to...

 Open the catalogue to page 2

All J&D Electronics catalogues and technical brochures

  1. Split-Core CTs

    2 Pages

    En
  2. JN4V

    1 Pages

    En
  3. JD7W

    1 Pages

    En
  4. JD4W

    1 Pages

    En
  5. JIVD30

    1 Pages

    En
  6. JIVD50

    1 Pages

    En
  7. EVS30-XXXX

    2 Pages

    En
  8. NEW METER CATALOG

    76 Pages

    En