© 2000 IXYS All rights reserved 1 - 2 VGO 36 Features • Package with DCB ceramic base plate • Isolation voltage 3000 V~ • Planar passivated chips • Low forward voltage drop • Leads suitable for PC board soldering Applications • Supplies for DC power equipment • Input rectifiers for PWM inverter • Battery DC power supplies • Field supply for DC motors Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling capability • Small and light weight Data according to IEC 60747 refer to a single diode/thyristor unless otherwise stated for resistive load at bridge output. IXYS reserves the right to change limits, test conditions and dimensions. IdAV = 36 A VRRM = 800-1600 V Symbol Test Conditions Maximum Ratings IdAV TH = 85°C, module 36 A IdAVM module 40 A IFRMS, ITRMS per leg 31 A IFSM, ITSM TVJ = 45°C; t = 10 ms (50 Hz), sine 320 A VR = 0 V t = 8.3 ms (60 Hz), sine 350 A TVJ = TVJM t = 10 ms (50 Hz), sine 280 A VR = 0 V t = 8.3 ms (60 Hz), sine 310 A I2t TVJ = 45°C t = 10 ms (50 Hz), sine 500 A2s VR = 0 V t = 8.3 ms (60 Hz), sine 520 A2s TVJ = TVJM t = 10 ms (50 Hz), sine 390 A2s VR = 0 V t = 8.3 ms (60 Hz), sine 400 A2s (di/dt)cr TVJ = 125°C repetitive, IT = 50 A 150 A/s f = 50 Hz, tP = 200 s VD = 2/3 VDRM IG = 0.3 A, non repetitive, IT = 1/2 • IdAV 500 A/s diG/dt = 0.3 A/s (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM 1000 V/s RGK = ; method 1 (linear voltage rise) VRGM 10 V PGM TVJ = TVJM tp = 30 s 10 W IT = ITAVM tp = 500 s 5 W tp = 10 ms 1 W PGAVM 0.5 W TVJ -40...+125 °C TVJM 125 °C Tstg -40...+125 °C VISOL 50/60 Hz, RMS t = 1 min 2500 V~ IISOL 1 mA t = 1 s 3000 V~ Md Mounting torque (M4) 1.5 - 2 Nm 14 - 18 lb.in. Weight typ. 18 g Single Phase Rectifier Bridge VRSM VRRM Type VDSM VDRM V V 900 800 VGO 36-08io7 1300 1200 VGO 36-12io7 1500 1400 VGO 36-14io7 1700 1600 VGO 36-16io7 H N K D G A 002 Preliminary data

© 2000 IXYS All rights reserved 2 - 2 Dimensions in mm (1 mm = 0.0394") Symbol Test Conditions Characteristic Values IR, ID VR = VRRM; VD = VDRM TVJ = TVJM 5 mA TVJ = 25C 0.3 mA VT, VF IT, IF = 45 A; TVJ = 25C 1.45 V VT0 For power-loss calculations only (TVJ = 125C) 0.85 V rT 13 m VGT VD = 6 V; TVJ = 25C 1.0 V TVJ = -40C 1.2 V IGT VD = 6 V; TVJ = 25C 65 mA TVJ = -40C 80 mA TVJ = 125C 50 mA VGD TVJ = TVJM; VD = 2/3 VDRM 0.2 V IGD TVJ = TVJM; VD = 2/3 VDRM 5 mA IL IG = 0.3 A; tG = 30 s; TVJ = 25C 150 mA diG/dt = 0.3 A/s; TVJ = -40C 200 mA TVJ = 125C 100 mA IH TVJ = 25C; VD = 6 V; RGK = 100 mA tgd...