USB - to - CAN V2 , device update from product version V1.0 to V1 .1
2Pages

USB-to-CAN , device update from product version V1.0 to VI.1 This update can be done on all variants of the USB-to-CAN interfaces with product version V1.0 Improved functionality: • The USB startup has been improved and is now more robust on critical PCs. • So far an RTR-message issue could lead to unexpected transmission stops in certain operating conditions. This has been fixed. • Fixed an issue with CAN receive overruns in a special operating mode (exclusive mode). • Improved cycle time accuracy for cyclic transmit lists. • Bus load calculation has been improved significantly (more accurate). Added functionality: • CAN bitrate of 83,3 kBit is supported Updating your USB-to-CAN V2 to version VI.1 needs following requirements: • PC with Windows XP / 7 / 8 operating system • IXXAT VCI driver with version V3.B.2.4072 or higher installed • USB-to-CAN V2 firmware file V1.0B.04 downloaded 1. Download firmware file USB-to-CAN_V2_VCI_flash_V1.05.04.hexfrom http://www.ixxat.com/firmwa 2. Connect the USB-to-CAN V2 device to your USB port 3. Start the VCI3 flashloader C:\Program FilesMXXATWCI 3.5\VCI3floadGUI.exe 4. Select the USB-to-CAN V2 device 5. Select firmware file (downloaded in step 1) 6. Start the Flash process 7. Wait until update process is finished, DON'T REMOVE THE DEVICE 9. Recommendation: Write the new product version onto the product label on the back side of the device (e.g. VI.1) |1617 Jtl L SBioGAN'Wccrroart <DOttTAatorrtslion Grrbd? Diin> voi.m.oj.w: vta.u vmoi KM FLASH vrfi h»i wmmnBm FLASH version selected Device successfully

USB-to-CAN , Gerate-Update von Produktversion V1.0 zu VI.1 Dieses Update kann bei alien Varianten des USB-to-CAN Interfaces mit der Produktversion V1.0 durchgefuhrt werden Verbesserte Funktionalitat: • Der USB-Startup wurde verbessert und ist nun in Verbindungen mit kritischen PCs robuster. • Eine RTR-Nachricht konnte unter bestimmten Umstanden zu einem unerwarteten Stoppen der Ubertragung fuhren. Dieser Fehler wurde behoben. • Ein Problem mit Uberlaufen von empfangenen Nachrichten in einer speziellen Betriebsart (exclusive mode) wurde behoben. • Die Genauigkeit der Zykluszeit in der...