catalogue search
P. 101
P. 102
P. 103
P. 104
P. 105
P. 106
P. 107
P. 108
|
|
|
|
|
|
|
|
You may also be interested in
Sprocket wheel, Roller chain, Chain sprocket, Stainless steel chain, Steel chain
Text version of the page
| Tel: +49 89 76909-1600 Fax: +49 89 76909-1122 I \Af I S ^1 sales-muenchen@iwis.com www.iwis.com ... antnebssysteme wir bewegen die welt | ||||||||||||||||||||||||||||||||||||||
| Re-lubrication of the ^ chains Re-lubricants | ||||||||||||||||||||||||||||||||||||||
| RE-LUBRICATION | ||||||||||||||||||||||||||||||||||||||
| CD bo | ||||||||||||||||||||||||||||||||||||||
| The life of a chain is dependent to a decisive extent on correct and adequate topping up of the lubricant. As a consequence of the oscillating movements of the chain link, the initial lubricant is used up in the course of time depending on the operating conditions. If the lubricant is topped up regularly, the chain is mainly within the range of fluid and mixed friction. An absence of lubricant or badly selected re-lubricants cause dry friction, which leads to the formation of fretting corrosion and increased wear of the chain. The selection of the lubricant and the correct lubrication technique is decisive for effective re-lubrication. | ||||||||||||||||||||||||||||||||||||||
| Initial lubrication without re-lubrication | ||||||||||||||||||||||||||||||||||||||
| Dry running: Chain without initial and re-lubrication | Optimum re-lubrication | |||||||||||||||||||||||||||||||||||||
| ncorrect | ||||||||||||||||||||||||||||||||||||||
| interval too long: occasional dry-running | re-lubrication | |||||||||||||||||||||||||||||||||||||
| RE-LUBRICANTS | ||||||||||||||||||||||||||||||||||||||
| RECOMMENDED RE-LUBRICANTS FOR OUR INITIAL LUBRICANTS | ||||||||||||||||||||||||||||||||||||||
| should possess the following characteristics - depending on the application: • Adhesiveness • Compatibility with initial lubricant • Corrosion protection • Load-bearing capacity of lubricant film • Ability to creep • Lubrication of emergency running • High viscosity and simultaneous ability to flow • High temperature stability • Water-repellent • Resistance to media etc. | ||||||||||||||||||||||||||||||||||||||
| IP2 iwis VP6 Kombi superplus (spray) All standard commercial chain oils IP3 iwis VP6 Kombi superplus (spray) High performance chain oils from various manufacturers, e.g. STRUCTOVIS HD-series from Kluber Lubrication IPW iwis VP6-Kombi superplus (spray) High performance chain oils from various manufacturers, e.g. STRUCTOVIS HD-series from Kluber Lubrication | ||||||||||||||||||||||||||||||||||||||
| IP9 iwis VP6-Kombi superplus (spray) All conventional chain oils IP14 iwis VP6-Kombi superplus (spray) Chain oils containing a proportion of solid lubricant such as graphite, MOS2 IP16 chain oils approved for food use, e.g. Kluberoil UH 1-series IPO low temperature chain oils from various manufacturers | ||||||||||||||||||||||||||||||||||||||
| IP4 iwis VP6-Kombi superplus (spray) High temperature chain oils from various manufacturers, for temperatures above 250°C with proportions of solid lubricant | ||||||||||||||||||||||||||||||||||||||
| Designation initial lubricant I Recommendation re-lubricant | ||||||||||||||||||||||||||||||||||||||