MD-F series
10Pages

MD-F MD-V series Magnetic drive pumps A world’s best-seller, the high-end compact magnetic pumps Main material MD - F MD-V CFRETFE CFRPVDF Magnetically-driven seal-less pumps are free from leak problems and the need of seal replacement. Most chemicals can be handled including strong acid /alkaline.

Compliant with highly corrosive / viscous liquids High-end compact magnetic drive pumps Most chemicals can be handled including strong acid/alkaline. High corrosion-resistance Viscosity responsiveness The combination of the MD-F series with CFRETFE wet ends and the MD-V series with CFRPVDF wet ends covers most chemicals including strong acid/alkaline. The MD-F series is designed to pump highly viscous liquids such as strong acid. Three types of impellers are selectable according to liquid viscosity. MD-F MD-15F MD-30F MD-15F(X/Y)·30F(X/Y) • Max Discharge capacity 9 - 13 l/min 3-8m • Max...

MD-F/MD-V series Leak free Easy maintenance Magnetically-driven seal-less pumps are free from leak problems and the need of seal replacement. This feature and its compact nature offer the best fit in built-in applications. The pump unit is comprised of a small number of subunits, so that maintenance is significantly eased. MD-V MD-15RV MD-20RZV MD-15RV·20RZV·30(R/RZ)V • Max Discharge capacity 10 - 32 l/min 2.4 - 8.0 m • Max Discharge head MD-30RV C F R PVDF MD-70RV MD- 70(R/RZ)V C F R PVDF • Max Discharge capacity 40 - 86 l/min 6.7 - 14.3 m • Max Discharge head 2

A wide selection range accordin Hyperbaric/High-compression types are available.

MD-F/MD-V series Construction Motor Drive magnet The 6- or 8-pole high power ferrite magnet drives the impeller over the rear casing. Rear casing O ring CFRETFE single-piece rear casing of the MD-F and CFRPVDF single-piece rear casing of the MD-V. The bearing is placed at the bottom, supporting the spindle. Impeller Spindle MD-F CFRETFE single-piece closed impeller. Three impeller types (X/Y) are available according to specific gravity. Front casing MD-F CFRETFE injection mold of the safety thread connection type MD-V CFRPVDF hose connection is available as well as thread connection. Also...

Range of Max. discharge capacity: 9 -13 L/min Range of Max. discharge head: 3 - 8 m ■ Temperature range: 0 - 80°C (Contact us for applications below zero.) • Limit of viscosity: 30 mPa-s (at 1 S.G.) • Ambient temperature: 0 -40°C ■ Motor type: Capacitor-run induction motor Pump identification lllustlation shows model MD-30F * Pump size E:EPDM (Special order) Performance curves (SOHZ) Capacity (L/min) Note: Figures on the performance curves shows the specific gravity limit at viscosity of 1 mPa-s.

■ Temperature range: 0 - 80°C (Contact us for applications below zero.) - Limit of viscosity: 30 mPa-s (at 1 S.G.) • Ambient temperature: 0 -40°C Pump identification Front casing Thrust ring llustlation shows model MD-100F IPump size Note: Specify the pump model and power specification at an inquiry phase. Performance curves (SOHZ) Capacity (L/min) Note: Figures on the performance curves shows the specific gravity limit at viscosity of 1 mPa-s. Available with IEC frame motors This type of unit allows the pumps to be supplied with numerous motor options.

Range of Max. discharge capacity: 10 - 32 L/min Range of Max. discharge head: 2.4 - 8.0 m ■ Temperature range: 0 - 80°C (Contact us for applications below zero.) • Limit of viscosity: 30 mPa-s (at 1 S.G.) • Ambient temperature: 0 - 40°C ■ Motor type: Capacitor-run induction motor Note: The union field shows the nominal diameter of the applicable VP vinyl chloride hose. Heat resistance of the union is 0 - 55°C Front casing Thrust ring Alumina ceramic llustlation shows model MD-30RZV Note: Material of bearing for MD-15RV, 20RZV and 30RV are CFRPPS Alumina ceramic Pump identification Pump size...

Range of Max. discharge capacity: 40 - 86 L/mi • Range of Max. discharge head: 6.7 -14.3 m ■ Temperature range: 0 - 80°C (Contact us for applications below zero.) • Limit of viscosity: 30 mPa-s (at 1 S.G.) • Ambient temperature: 0 - 40°C Note: The union field shows the nominal diameter of the applicable VP vinyl chloride hose. Heat resistance of the union is 0 - 55°C Pump identification Pump size No mark: Hose type Alumina ceramic RZ: High head type lllustlation shows model MD-70RV Note: Material of bearing for MD-70RZV is CFRPPS Note: Specify the pump model and power specification at an...

Special accessories • Union joint Special-purpose union joints are available to cope with three types (13mm, 16mm and 20mm dia.) of piping. Tight sealing O-rings are used to prevent thread damage caused by over-tightening. Specifications Model 13A 16A Material PVC PVC PVC 0 - 55˚C 0 - 55˚C 0 - 55˚C Range of temp. Material of O ring 20A FKM or EPDM Dimensions (mm) MD-F e e f f MD-55F, 100F c a g b d d H H MD-15F, 30F i c a W L i W g b L Illustration shows MD-30F b c d e f g i 186 a - 50 68 55 34 29 99 2 - ø5.6 231 40 64 100 60 39 39 120 4 - ø9 Model W H L MD-15F 95 120 MD-30F 120 130...