Catalog excerpts
IWAKI MAGNETIC DRIVE PUMPS Solutions for chemical handling applications
Open the catalog to page 1Even better dry-running resistance and efficiency than previous models. Iwaki MX magnetic drive pumps - reliable & energy efficient. The MX Series represents the latest state of the art design in plastic magnetic drive pumps to meet the most severe of operating conditions. When fitted with a carbon bearing the MX will allow for brief periods of dry running. The new “self radiating structure” (PAT.) in addition to the existing proven non contact principle and front and rear supported spindle greatly improves the pumps ability to withstand some cavitation and running against closed discharge...
Open the catalog to page 2IWAKI MAGNETIC DRIVE PUMPS Self-radiating structure (PAT.) Through heat-dispersion holes provided in the fixed portions of the impeller and the magnet capsule, the liquid around the spindle and the bearing is forced to circulate so that heat generated by sliding can be reduced effectively. Thus, thermal deformation and melt are prevented. (Except MX-70, 100) Heat-dispersion holes Spindle Rear thrust Volute casing divided into two sections (PAT.) The MX series is the first resin magnet pump which uses the pump casing divided into the front casing and the rear casing to form a vortex chamber...
Open the catalog to page 3Note 1: An O-ring made of AFLAS is also available Note 1: An O-ring made of AFLAS® is also available
Open the catalog to page 4IWAKI MAGNETIC DRIVE PUMPS Series symbol MX: Material of Casing/GFRPP Motor specification E: IEC motor ^ Special specification: No mark: Standard S: Order-made specification Material of Bearing/Spindle/O-ring MX CV, CE: Carbon/Alumina ceramic/FKM(EPDM) RV, RE: PTFE/Alumina ceramic/FKM(EPDM) AV, AE: Alumina ceramic/Alumina ceramic/FKM(EPDM) Note: “7" means exclusive IE2 motor. Applicable models are MX-250/251,400 & 401. Specifications Model Note 1) The specific gravity limit values shown above are with maximum discharges. The specific gravity limit varies with the discharge. For details,...
Open the catalog to page 5Performance curves MX-400 (Impeller mark: 5) MX-400 (Impeller mark: 7) CAPACITY (L/min) CAPACITY (L/min)
Open the catalog to page 6IWAKI MAGNETIC DRIVE PUMPS
Open the catalog to page 7IWAKI MAGNETIC DRIVE PUMPS Iwaki process magnetic drive pump series MX-F series Withstands difficult operating conditions and offers high efficiency Max. discharge capacity: 510 L/min Max. discharge head: 30 m Main materials: CFRETFE SMX series Versatile self-priming magnetic drive pump with enhanced durability under abnormal operation Max. discharge capacity: 440 L/min Max. head: 25.5 m Main materials: GFRPP, CFRETFE MXM series Magnetic drive pumps with an excellent balance of features and performance Max. discharge capacity: 600 L/min Max. head: 29 m Main materials: CFRETFE MDM series...
Open the catalog to page 8All IWAKI Europe GmbH catalogs and technical brochures
-
TC-X
28 Pages
-
IX-B
8 Pages
-
MEK
5 Pages
-
MMP
2 Pages
-
MP series
2 Pages
-
MTFO
2 Pages
-
LK Metering pumps
8 Pages
-
IX-C/D
12 Pages
-
MX-F magnet drive pumps
8 Pages
-
NRD/RD
4 Pages
-
SMX-F
8 Pages
-
EJ-R
2 Pages
-
EWN-W
2 Pages
-
V
8 Pages
-
Serie MDW
8 Pages
-
MDE
8 Pages
-
MDM
5 Pages
-
MXM
5 Pages
-
SMX
8 Pages
-
RD-40
2 Pages
-
EWN-Y
8 Pages
-
EWN-A
2 Pages
-
Magnetic drive pumps MD series
12 Pages
-
MD-F, MD-V
10 Pages
-
EWN-Y-A & EFS
2 Pages
-
HRP
2 Pages
-
MDM NP
8 Pages
-
FW/-H
12 Pages
-
Serie YMD
8 Pages
-
Serie CFD
12 Pages
-
Serie FA
12 Pages
-
Air pumps
8 Pages
-
Serie MDT
2 Pages
Archived catalogs
-
RD
4 Pages
-
Hicera pumps
4 Pages
-
Chemical gear pumps
8 Pages
-
Bellows pumps
2 Pages