Text version of the page

Technical Data Sheet

5/21/2008

Zip Grip® SIE 30 - 15203 Permatex® Zip Grip® SIE 30

Description: A single component low viscosity, wicking grade surface insensitive cyanoacrylate adhesive. Intended Use: Ideal for bonding metals, rubber, and plastics. Product is specifically formulated for wicking into porous, dry or acidic surfaces and substrates such as wood, leather and fiberglass mat. Product features:Surface Insensitive [wicking grade]PermanentEasy to applyFixtures in secondsTypical PhysicalProperties: Limitations: Surface Preparation: Technical data should be considered representative or typical only and should not be used for specification purposes. Cured 7 days @ 75° FAdhesive Tensile Shear3,200 psi [steel/steel]Coefficient of Thermal Expansion.000126 in./in./ °FDielectric Constant5.4 @ 1KcDielectric Strength11.6 KV/mmFlashpoint185°FFull Cure24 hoursMelting Point329°FRefractive Index1.49Service Temperature Range-60° to 200°FShelf Life1 yearSolubilityNitromethane, Acetone, Volume Resistivity5.3E-14 ohm/cm TESTS CONDUCTED Adhesive Tensile Shear ASTM D 1002Coef. of Thermal Expansion ASTM D 696 Dielectric Constant ASTM D 150 Dielectric Strength, volts/mil ASTM D 149 Volume Resistivity , ohm/cm ASTM D 149 UncuredBaseEthyl cyanoacrylateColorColorless liquidCure Speed5-12 sec. (Steel): 3-7 sec. (Plastics): <6 sec. ( Gap Filling0.004" Military SpecificationMil-A-46050C Type II Class 1Specific Gravity1.06 g/ccViscosity30 cps Clean surface by solvent-wiping any deposits of heavy grease, oil, dirt, or other contaminants. Surface can also be cleaned with industrial cleaning equipment such as vapor phase degreasers or hot aqueous baths.---- CLEANING METHODS ---- STEEL:Vapor degrease or cold-solvent clean (Sand blasting or other preparation is not typically required).ALUMINUM:Abrade with Scotch-Brite™ abrasive pads or steel wool, then clean with solvent.RUBBER:Wipe clean with isopropyl alcohol or solvent.PLASTICS:Lightly abrade shiny, smooth surfaces, then solvent-wipe with suitable solvent such as 1,1,1-trichloroethane, acetone, or VM&P naptha. Non-shiny surfaces need only be solvent-wiped. Mixing Instructions: Mixing is not applicable to this product. ITW Devcon, 30 Endicott Street, Danvers, MA 01923 Tel:(978) 777-1100 Fax:(978) 774-0516 www.devcon.com