1. Apply adhesive directly from bottle [approx .006 gms per sq. in is sufficient] 2. Press surfaces together
3. Hold tightly for a few seconds
ADDITIONAL PRODUCT INFORMATION
- Cyanoacrylates fixture in a few seconds on most smooth, close fitting substrates -They cure best at room temperature [72°F] -Heat does NOT accelerate the cure of cyanaoacrylates
-The gap of the bond line will affect set speed. Smaller gaps tend to increase the speed. -Activators can be appied to improve set speed but may also impair overall performance.
Store in a cool, dry place. CID A-A-3097, Type II, Class 1 ADDITIONAL PRODUCT INFORMATION
- Cyanoacrylates fixture in a few seconds on most smooth, close fitting substrates -They cure best at room temperature [72°F] -Heat does NOT accelerate the cure of cyanaoacrylates
-The gap of the bond line will affect set speed. Smaller gaps tend to increase the speed. -Activators can be appied to improve set speed but may also al
Chemical resistance is calculated with a 7 day, room temp. cure (30 days immersion) @ 75 °F)
1,1,1-Trichloroethane__Excellent
Gasoline (Unleaded)__Excellent
Hydrochloric 10%__Poor_
Motor Oil__Excellent
Sodium Hydroxide 10%_Poor_
Please refer to the appropriate material safety data sheet (MSDS) prior to using this product. For technical assistance, please call 1-800-933-8266 FOR INDUSTRIAL USE ONLY
Devcon will replace any material found to be defective. Because the storage, handling and application of this material is beyond our control, we can accept no liability for the results obtained.
All information on this data sheet is based on laboratory testing and is not intended for design purposes. ITW Devcon makes no representations or warranties of any kind concerning this data.