Submersible Dewatering Pumps - ITT Water & Wastewater - #2

Text version of the page

dependable compression cable seal, which can easily be serviced in the field without the need of epoxy sealers. High tolerance machining from the outer stator core diameter and inner motor housing surface allows us to precisely shrink-fit the motor stator core into the housing. This Flygt feature provides a uniform metal-to-metal contact between the heat producing motor and the motor housing, resulting in exceptional cooling without the need of messy, expensive cooling oil. BS Series Flygt dewatering pumps are known for job site dependability. Constructed of strong die cast aluminum body parts, they feature high chrome hardened impellers, PolyLife or nitrile rubber adjustable wear parts for long life. These tough pumps do not have to be totally submerged and will operate under snore conditions if necessary. Many are available in MSHA certified, explosion proof versions for use in mining for landfill dewatering. Continuing its tradition of excellence, Flygt has recently introduced its latest generation of dewatering pumps. Designated the 2600 series, the new dewatering pump line features innovative hydraulics, fewer components, new materials and a practical, ergonomic design. The patented DuraSpin™ hydraulic system and newly designed impeller improves wear resistance and sustains performance over time. The wear-resistant closed 2 Construction workers and miners have come to trust the compact, heavy-duty design of Flygt submersible pumps since they were developed more than 60 years ago. Flygt was the first to offer a practical, heavy-duty electric submersible pump that could withstand the severe demands of construction site and mine dewatering and yet still be portable. Over time these early submersibles became the prototype for a complete range of other hard working Flygt submersible pumps, all built in the same tradition of dependability. Today at Flygt, we know from over 60 years of experience what it takes to design and manufacture the finest heavy-duty submersible equipment. The high tolerance machining is a standard manufacturing procedure for all parts that makeup our products. We know from experience that it takes many precision steps along with quality “O” rings, to achieve the exceptional “fit” needed to keep a submersible motor dry. This also includes the critical sealing area such as where the power cable enters the pump. Here all parts are extensively machined so that just the right amount of compression force is applied between the sealing grommet, cable and pump body, each and every time the cable entry bolts are tightened up. The result is a 1 ITT FLYGT SUBMERSIBLE DEWATERING PUMPS The original submersible Flygt dewatering pump