Standard type Series PM570AS / PM605AS - ITOH DENKI - #1

Text version of the page

POWER MOLLER STANDARD THREE PHASE SERIES PM570AS 57 PM605AS 60.5 FEATURES: PM570/605AS series Power Moller are designed to motorise medium-heavy load handling conveyors. - Thermally stable motor that can be operated 24 hours without fear of overheating - IP-54 enclosure as standard - Class E Insulation - Supplied with No A-200 terminal bracket - Use accumulation type, if the loads are to be accumulated OPERATION: Continuous duty 24 hours, or Intermittent operation Minimum contact time 3 seconds ON, 2 seconds OFF Reversible Applicable ambient temperature -10 �` +40ßC DIMENSIONS: PM570AS (= 57), PM605AS (= 60.5) OPERATING CHARACTERISTICS at 50Hz Nominal Input Current (A) Speed Peripheral Velocity (m/min) Tangential Force (N) Starting Torque (Nm) 200V 220V 570 605 570 605 570/605 No load current 4 3.8 4.0 160.0 150.7 4.56 0.07 0.06 5 5.2 5.5 117.2 110.4 3.34 Starting Current 8 7.5 8.0 80.4 75.7 2.29 0.13 0.10 9 9.5 10.1 63.9 60.2 1.82 Input Power (W) 10 10.4 11.0 58.6 55.2 1.67 15 12.3 13 13.1 13.9 46.3 43.6 1.32 Output Power (W) 15 15.9 16.9 44.2 41.7 1.26 3.2 2.8 20 22.7 24.1 30.9 29.1 0.88 30 33.1 35.1 21.1 19.8 0.60 45 43.3 46.0 16.1 15.2 0.46 50 47.6 50.6 14.7 13.9 0.42 60 62.7 66.5 11.2 10.6 0.32 1N=0.1019kg 1Nm=10.19kgcm